# AVM BIOL368 Week 14

## Purpose

• To analyze microarray data for a strain of yeast with our journal club groups and add the information to our presentations. The presentations will be prepared and presented in class next week.

## Methods and Results

### Microarray Data Analysis

#### Before you begin: Turn on File Extensions

• The Windows 7 operating systems defaults to hiding file extensions. To turn them back on, do the following:
1. Go to the Start menu and select "Control Panel".
2. In the window that appears, search for "Folder Options" in the search field in the upper right hand corner.
3. Click on "Folder Options" in the main window.
4. When the Folder Options window appears, click on the View tab.
5. Uncheck the box for "Hide extensions for known file types".
6. Click the OK button.
• The computers in Seaver 120 are are set to erase all custom user settings and restore the defaults once they have been restarted, so if you have done this previously, you might have to do it again.

#### Experimental Design

Recall from last week's lecture, there were five timepoints in the experiment that were competitively hybridized with the t0 sample:

• t15 (cold shock)
• t30 (cold shock)
• t60 (cold shock)
• t90 (recovery)
• t120 (recovery)

Each timepoint has 3-5 independent replicates.

#### Within-strain ANOVA

The purpose of the within-stain ANOVA test is to determine if any genes had a gene expression change that was significantly different than zero at any timepoint.

1. Create a new worksheet, naming it "wt_ANOVA".
2. Copy the first three columns containing the "Master_Index", "ID", and "Standard_Name" from the "Master_Sheet" worksheet for your strain and paste it into your new worksheet. Copy the columns containing the data for your strain and paste it into your new worksheet.
3. At the top of the first column to the right of your data, create five column headers of the form wt_AvgLogFC_t where wt is your strain designation and t is 15, 30, etc.
4. In the cell below the wt_AvgLogFC_t15 header, type =AVERAGE(
5. Then highlight all the data in row 2 associated with wt and t15, press the closing paren key (shift 0),and press the "enter" key.
6. This cell now contains the average of the log fold change data from the first gene at t=15 minutes.
7. Click on this cell and position your cursor at the bottom right corner. You should see your cursor change to a thin black plus sign (not a chubby white one). When it does, double click, and the formula will magically be copied to the entire column of 6188 other genes.
8. Repeat steps (4) through (8) with the t30, t60, t90, and the t120 data.
9. Now in the first empty column to the right of the wt_AvgLogFC_t120 calculation, create the column header wt_ss_HO.
10. In the first cell below this header, type =SUMSQ(
11. Highlight all the LogFC data in row 2 for your wt (but not the AvgLogFC), press the closing paren key (shift 0),and press the "enter" key.
12. In the next empty column to the right of wt_ss_HO, create the column headers wt_ss_(TIME) as in (3).
13. Make a note of how many data points you have at each time point for your strain. For most of the strains, it will be 4, but for dHAP4 t90 or t120, it will be "3", and for the wild type it will be "4" or "5". Count carefully. Also, make a note of the total number of data points. Again, for most strains, this will be 20, but for example, dHAP4, this number will be 18, and for wt it should be 23 (double-check).
14. In the first cell below the header wt_ss_t15, type =SUMSQ(<range of cells for logFC_t15>)-<number of data points>*<AvgLogFC_t15>^2 and hit enter.
• The phrase <range of cells for logFC_t15> should be replaced by the data range associated with t15.
• The phrase <number of data points> should be replaced by the number of data points for that timepoint (either 3, 4, or 5).
• The phrase <AvgLogFC_t15> should be replaced by the cell number in which you computed the AvgLogFC for t15, and the "^2" squares that value.
• Upon completion of this single computation, use the Step (7) trick to copy the formula throughout the column.
15. Repeat this computation for the t30 through t120 data points. Again, be sure to get the data for each time point, type the right number of data points, and get the average from the appropriate cell for each time point, and copy the formula to the whole column for each computation.
16. In the first column to the right of wt_ss_t120, create the column header wt_SS_full.
17. In the first row below this header, type =sum(<range of cells containing "ss" for each timepoint>) and hit enter.
18. In the next two columns to the right, create the headers wt_Fstat and (STRAIN)_p-value.
19. Recall the number of data points from (13): call that total n.
20. In the first cell of the wt_Fstat column, type =((23-5)/5)*(<wt_ss_HO>-<wt_SS_full>)/<wt_SS_full> and hit enter.
• n=23. Also note that "5" is the number of timepoints.
• Replace the phrase wt_ss_HO with the cell designation.
• Replace the phrase <wt_SS_full> with the cell designation.
• Copy to the whole column.
21. In the first cell below the wt_p-value header, type =FDIST(<wt_Fstat>,5,23-5) replacing the phrase <wt_Fstat> with the cell designation and the "n" as in (13) with the number of data points total. (Again, note that the number of timepoints is actually "4" for the dSWI4 strain). Copy to the whole column.
22. Before we move on to the next step, we will perform a quick sanity check to see if we did all of these computations correctly.
• Click on cell A1 and click on the Data tab. Select the Filter icon (looks like a funnel). Little drop-down arrows should appear at the top of each column. This will enable us to filter the data according to criteria we set.
• Click on the drop-down arrow on your wt_p-value column. Select "Number Filters". In the window that appears, set a criterion that will filter your data so that the p value has to be less than 0.05.
• Excel will now only display the rows that correspond to data meeting that filtering criterion. A number will appear in the lower left hand corner of the window giving you the number of rows that meet that criterion. We will check our results with each other to make sure that the computations were performed correctly.

#### Calculate the Bonferroni and p value Correction

1. Now we will perform adjustments to the p value to correct for the multiple testing problem. Label the next two columns to the right with the same label, wt_Bonferroni_p-value.
2. Type the equation =<wt_p-value>*6189, Upon completion of this single computation, use the Step (10) trick to copy the formula throughout the column.
3. Replace any corrected p value that is greater than 1 by the number 1 by typing the following formula into the first cell below the second wt_Bonferroni_p-value header: =IF(r2>1,1,r2). Use the Step (10) trick to copy the formula throughout the column.
• After filtering, only 302 of the data are less than 0.05.

#### Calculate the Benjamini & Hochberg p value Correction

1. Insert a new worksheet named "(STRAIN)_ANOVA_B-H".
2. Copy and paste the "Master_Index", "ID", and "Standard_Name" columns from your previous worksheet into the first two columns of the new worksheet.
3. For the following, use Paste special > Paste values. Copy your unadjusted p values from your ANOVA worksheet and paste it into Column D.
4. Select all of columns A, B, C, and D. Sort by ascending values on Column D. Click the sort button from A to Z on the toolbar, in the window that appears, sort by column D, smallest to largest.
5. Type the header "Rank" in cell E1. We will create a series of numbers in ascending order from 1 to 6189 in this column. This is the p value rank, smallest to largest. Type "1" into cell E2 and "2" into cell E3. Select both cells E2 and E3. Double-click on the plus sign on the lower right-hand corner of your selection to fill the column with a series of numbers from 1 to 6189.
6. Now you can calculate the Benjamini and Hochberg p value correction. Type (STRAIN)_B-H_p-value in cell F1. Type the following formula in cell F2: =(D2*6189)/E2 and press enter. Copy that equation to the entire column.
7. Type "STRAIN_B-H_p-value" into cell G1.
8. Type the following formula into cell G2: =IF(F2>1,1,F2) and press enter. Copy that equation to the entire column.
9. Select columns A through G. Now sort them by your Master_Index in Column A in ascending order.
10. Copy column G and use Paste special > Paste values to paste it into the next column on the right of your ANOVA sheet.

#### Sanity Check: Number of genes significantly changed

Before we move on to further analysis of the data, we want to perform a more extensive sanity check to make sure that we performed our data analysis correctly. We are going to find out the number of genes that are significantly changed at various p value cut-offs.

• Go to your (STRAIN)_ANOVA worksheet.
• Select row 1 (the row with your column headers) and select the menu item Data > Filter > Autofilter (The funnel icon on the Data tab). Little drop-down arrows should appear at the top of each column. This will enable us to filter the data according to criteria we set.
• Click on the drop-down arrow for the unadjusted p value. Set a criterion that will filter your data so that the p value has to be less than 0.05.
• How many genes have p < 0.05? and what is the percentage (out of 6189)?
• 2600 and 42%
• How many genes have p < 0.01? and what is the percentage (out of 6189)?
• 1727 and 27%
• How many genes have p < 0.001? and what is the percentage (out of 6189)?
• 1015 and 16%
• How many genes have p < 0.0001? and what is the percentage (out of 6189)?
• 574 and 9%
• When we use a p value cut-off of p < 0.05, what we are saying is that you would have seen a gene expression change that deviates this far from zero by chance less than 5% of the time.
• We have just performed 6189 hypothesis tests. Another way to state what we are seeing with p < 0.05 is that we would expect to see this a gene expression change for at least one of the timepoints by chance in about 5% of our tests, or 309 times. Since we have more than 309 genes that pass this cut off, we know that some genes are significantly changed. However, we don't know which ones. To apply a more stringent criterion to our p values, we performed the Bonferroni and Benjamini and Hochberg corrections to these unadjusted p values. The Bonferroni correction is very stringent. The Benjamini-Hochberg correction is less stringent. To see this relationship, filter your data to determine the following:
• How many genes are p < 0.05 for the Bonferroni-corrected p value? and what is the percentage (out of 6189)?
• 302, 4.8%
• How many genes are p < 0.05 for the Benjamini and Hochberg-corrected p value? and what is the percentage (out of 6189)?
• 1936 and 31%
• In summary, the p value cut-off should not be thought of as some magical number at which data becomes "significant". Instead, it is a moveable confidence level. If we want to be very confident of our data, use a small p value cut-off. If we are OK with being less confident about a gene expression change and want to include more genes in our analysis, we can use a larger p value cut-off.
• Comparing results with known data: the expression of the gene NSR1 (ID: YGR159C)is known to be induced by cold shock. Find NSR1 in your dataset. What is its unadjusted, Bonferroni-corrected, and B-H-corrected p values? What is its average Log fold change at each of the timepoints in the experiment? Note that the average Log fold change is what we called "STRAIN)_AvgLogFC_(TIME)" in step 3 of the ANOVA analysis.
• Bonferonni: 3.2x10^-8
• BH: 1.8x10^-9
• t15: 3.3
• t30: 3.6
• t60: 3.5
• t90: -2.0
• t120: -0.6
• We will compare the numbers we get between the wild type strain and the other strains studied, organized as a table. Use this sample PowerPoint slide to see how your table should be formatted.

#### Clustering and GO Term Enrichment with stem

• Insert a new worksheet into your Excel workbook, and name it "wt_stem".
• Select all of the data from your "wt_ANOVA" worksheet and Paste special > paste values into your "wt_stem" worksheet.
• Your leftmost column should have the column header "Master_Index". Rename this column to "SPOT". Column B should be named "ID". Rename this column to "Gene Symbol". Delete the column named "Standard_Name".
• Filter the data on the B-H corrected p value to be > 0.05 (that's greater than in this case).
• Once the data has been filtered, select all of the rows (except for your header row) and delete the rows by right-clicking and choosing "Delete Row" from the context menu. Undo the filter. This ensures that we will cluster only the genes with a "significant" change in expression and not the noise.
• Delete all of the data columns EXCEPT for the Average Log Fold change columns for each timepoint (for example, wt_AvgLogFC_t15, etc.).
• Rename the data columns with just the time and units (for example, 15m, 30m, etc.).
• Save your work. Then use Save As to save this spreadsheet as Text (Tab-delimited) (*.txt). Click OK to the warnings and close your file.
• Note that you should turn on the file extensions if you have not already done so.
• Click on the download link, register, and download the stem.zip file to your Desktop.
• Unzip the file. In Seaver 120, you can right click on the file icon and select the menu item 7-zip > Extract Here.
• This will create a folder called stem. Inside the folder, double-click on the stem.jar to launch the STEM program.
3. Running STEM
1. In section 1 (Expression Data Info) of the the main STEM interface window, click on the Browse... button to navigate to and select your file.
• Check the box next to Spot IDs included in the data file.
2. In section 2 (Gene Info) of the main STEM interface window, select Saccharomyces cerevisiae (SGD), from the drop-down menu for Gene Annotation Source. Select No cross references, from the Cross Reference Source drop-down menu. Select No Gene Locations from the Gene Location Source drop-down menu.
3. In section 3 (Options) of the main STEM interface window, make sure that the Clustering Method says "STEM Clustering Method" and do not change the defaults for Maximum Number of Model Profiles or Maximum Unit Change in Model Profiles between Time Points.
4. In section 4 (Execute) click on the yellow Execute button to run STEM.
4. Viewing and Saving STEM Results
1. A new window will open called "All STEM Profiles (1)". Each box corresponds to a model expression profile. Colored profiles have a statistically significant number of genes assigned; they are arranged in order from most to least significant p value. Profiles with the same color belong to the same cluster of profiles. The number in each box is simply an ID number for the profile.
• Click on the button that says "Interface Options...". At the bottom of the Interface Options window that appears below where it says "X-axis scale should be:", click on the radio button that says "Based on real time". Then close the Interface Options window.
• Take a screenshot of this window (on a PC, simultaneously press the Alt and PrintScreen buttons to save the view in the active window to the clipboard) and paste it into a PowerPoint presentation to save your figures.
2. Click on each of the SIGNIFICANT profiles (the colored ones) to open a window showing a more detailed plot containing all of the genes in that profile.
• Take a screenshot of each of the individual profile windows and save the images in your PowerPoint presentation.
• At the bottom of each profile window, there are two yellow buttons "Profile Gene Table" and "Profile GO Table". For each of the profiles, click on the "Profile Gene Table" button to see the list of genes belonging to the profile. In the window that appears, click on the "Save Table" button and save the file to your desktop. Make your filename descriptive of the contents, e.g. "wt_profile#_genelist.txt", where you replace the number symbol with the actual profile number.
• Upload these files to OpenWetWare and link to them on your individual journal page. (Note that it will be easier to zip all the files together and upload them as one file).
• For each of the significant profiles, click on the "Profile GO Table" to see the list of Gene Ontology terms belonging to the profile. In the window that appears, click on the "Save Table" button and save the file to your desktop. Make your filename descriptive of the contents, e.g. "wt_profile#_GOlist.txt", where you use "wt", "dGLN3", etc. to indicate the dataset and where you replace the number symbol with the actual profile number. At this point you have saved all of the primary data from the STEM software and it's time to interpret the results!
• Upload these files to OpenWetWare and link to them on your individual journal page. (Note that it will be easier to zip all the files together and upload them as one file).
5. Analyzing and Interpreting STEM Results
1. Select one of the profiles you saved in the previous step for further interpretation of the data. I suggest that you choose one that has a pattern of up- or down-regulated genes at the cold shock time points. Each member of your group should choose a different profile. Answer the following:
• Why did you select this profile? In other words, why was it interesting to you?
• I chose profile 45 because my partners had already chosen their profiles, and I wanted to choose one that was a significant profile (colored box) .
• How many genes belong to this profile?
• 570 assigned genes
• How many genes were expected to belong to this profile?
• 51.1 genes were expected to belong to this profile
• What is the p value for the enrichment of genes in this profile?
• The p-value is just 0.

Bear in mind that we just finished computing p values to determine whether each individual gene had a significant change in gene expression at each time point. This p value determines whether the number of genes that show this particular expression profile across the time points is significantly more than expected.

• Open the GO list file you saved for this profile in Excel. This list shows all of the Gene Ontology terms that are associated with genes that fit this profile. Select the third row and then choose from the menu Data > Filter > Autofilter. Filter on the "p-value" column to show only GO terms that have a p value of < 0.05. How many GO terms are associated with this profile at p < 0.05?
• Only 234 of the 955 genes have a p-value < 0.05
The GO list also has a column called "Corrected p-value".  This correction is needed because the software has performed thousands of significance tests.  Filter on the "Corrected p-value" column to show only GO terms that have a corrected p value of < 0.05.  How many GO terms are associated with this profile with a corrected p value < 0.05?

• 37 of 955 genes
• Select 6 Gene Ontology terms from your filtered list (either p < 0.05 or corrected p < 0.05).
• I have chosen the following terms:
• rRNA binding:Interacting selectively and non-covalently with ribosomal RNA. [1]
• nuclear export: The directed movement of substances out of the nucleus. [2]
• nitrogen compound metabolic process: The chemical reactions and pathways involving organic or inorganic compounds that contain nitrogen, including (but not limited to) nitrogen fixation, nitrification, denitrification, assimilatory/dissimilatory nitrate reduction and the interconversion of nitrogenous organic matter and ammonium. [3]
• RNA 3' end processing: Any process involved in forming the mature 3' end of an rRNA molecule. [4]
• ribosomal subunit export from nucleus: The directed movement of a ribosomal subunit from the nucleus into the cytoplasm. [5]
• nuclear RNA surveillance: The set of processes involved in identifying and degrading defective or aberrant RNAs within the nucleus. [6]
• polyadenylation-dependent RNA catabolic process: The chemical reactions and pathways resulting in the breakdown of an RNA molecule, initiated by initiated by the enzymatic addition of a sequence of adenylyl residues (polyadenylation) at the 3'-end of the target RNA. [7]
• Each member of the group will be reporting on his or her own cluster in your presentation next week. You should take care to choose terms that are the most significant, but that are also not too redundant. For example, "RNA metabolism" and "RNA biosynthesis" are redundant with each other because they mean almost the same thing.
• Note whether the same GO terms are showing up in multiple clusters.
• Most of the terms chosen had some redundant patterns with other gene ontology choices.
• Look up the definitions for each of the terms at http://geneontology.org. In your final presentation, you will discuss the biological interpretation of these GO terms. In other words, why does the cell react to cold shock by changing the expression of genes associated with these GO terms? Also, what does this have to do with the transcription factor being deleted (for the Δgln3 and Δswi4 groups)?
• To easily look up the definitions, go to http://geneontology.org.
• Copy and paste the GO ID (e.g. GO:0044848) into the search field at center top of the page called "Search GO Data".
• In the results page, click on the button that says "Link to detailed information about <term>, in this case "biological phase"".
• The definition will be on the next results page, e.g. here.

## Conclusion

Over the course of the last two weeks in this lab, we read and compared papers which observed the affects of cold shock on yeast cells. The group observed the wild type (wt) strain from Schade et a. and analyzed their data using excel and the STEM program. An ANOVA test was used to determine significant differences between expression over time. This was used to expose that p-values can vary depending on the methods followed, these corrections can influence the number of "significant" results. The STEM profiles chosen in our Journal Club showed consistent up regulation of gene expression after cold shock response, except for Profile #9. GO terms and gene expression show limited similarities between early up regulated and wt genes from (Schade et. al 2004) which consisted of mostly metabolic processes and transport. We did not notice any similarities within early up regulation and expression of transcription in Dahlquist's data. To find more similarities between the two papers data, more genes from each profile would need to be analyzed, and more profiles from Dahlquists data would need to be used.

## Acknowledgments

• Template copied, but revised and followed from week 15 assignment BIOL368/F16
• Help from our professor, Dr. Dahlquist in class.
• Worked in collaboration with Courtney L. Merriam, Zachary T. Goldstein and Jordan T. Detamore in class as well as outside of class on this assignment. While I worked with the people noted above, this individual journal entry was completed by me and not copied from another source.
• Note: While I recieved assistance from those noted above, this individual journal entry was completed by me and not copied from another source.

Avery Vernon-Moore 23:51, 8 December 2016 (EST)

## References

#### Weekly Assignments:

Assignment 1
Assignment 2
Assignment 3
Assignment 4
Assignment 5
Assignment 6
Assignment 7
Assignment 8
Assignment 9
Assignment 10
Assignment 11
Assignment 12
Assignment 14
Assignment 15


#### Individual Journals:

"Week 1: Create Wiki Page"
Individual Journal 2
Individual Journal 3
Individual Journal 4
Individual Journal 5
Individual Journal 6
Individual Journal 7
Individual Journal 8
Individual Journal 9
Individual Journal 10
Individual Journal 11
Individual Journal 12
No Week 13 Assignment
Individual Journal 14
Individual Journal 15


#### Shared Journals:

Class Journal 1
Class Journal 2
Class Journal 3
Class Journal 4
Class Journal 5
Class Journal 6
Class Journal 7
Class Journal 8
Class Journal 9
Class Journal 10
Class Journal 11
Class Journal 12
Class Journal 14
Class Journal 15