All public logs
From OpenWetWare
Jump to navigationJump to search
Combined display of all available logs of OpenWetWare. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 09:36, 1 May 2023 Joebijujosep talk contribs created page File:Solid pin printing process.PNG
- 09:36, 1 May 2023 Joebijujosep talk contribs uploaded File:Solid pin printing process.PNG
- 14:48, 29 April 2023 Joebijujosep talk contribs created page Octobots (Created page with "The Octobot is a 3-D printed, fully autonomous microfluidic robot. The robot is made completely out of soft materials such as polydimethylsiloxane (PDMS) and Pluronic F127, SE 1700, and Sylgard 184, which are soft, silicone-based materials. In place of a rigid control center, the octobot is powered by a microfluidic logic circuit alongside a decomposition reaction that generates gas <ref name="Michael" /> Several different fabrication techniques are used to produce the...")
- 14:07, 29 April 2023 Joebijujosep talk contribs created page File:Inkjet.png (Inkjet printing diagram)
- 14:07, 29 April 2023 Joebijujosep talk contribs uploaded File:Inkjet.png (Inkjet printing diagram)
- 14:05, 29 April 2023 Joebijujosep talk contribs created page File:INKJET PRINT .png (Inkjet printing diagram)
- 14:05, 29 April 2023 Joebijujosep talk contribs uploaded File:INKJET PRINT .png (Inkjet printing diagram)
- 13:38, 29 April 2023 Joebijujosep talk contribs created page File:Extruder.png (Extruder diagram)
- 13:38, 29 April 2023 Joebijujosep talk contribs uploaded File:Extruder.png (Extruder diagram)
- 13:38, 29 April 2023 Joebijujosep talk contribs created page File:3D Print.png (3D print diagram)
- 13:38, 29 April 2023 Joebijujosep talk contribs uploaded File:3D Print.png (3D print diagram)
- 15:26, 16 April 2023 Joebijujosep talk contribs created page File:Strength comparison.png
- 15:26, 16 April 2023 Joebijujosep talk contribs uploaded File:Strength comparison.png
- 13:24, 16 April 2023 Joebijujosep talk contribs created page Applications of 3D Printing (Created page with "{{Template:CHEM-ENG590E}} ==Tissue Engineering== Let's say Mike Tyson bit off more then just a chunk of your ear. 3D bioprinting has the potential to customize a new ear for you. {{clear}} Image:LukeRuks5.png|thumb|left|780px|A 3D bioprinting system (a) The ITOP system consists of three major units: (i) 3-axis stage/controller, (ii) dispensing module including multi-cartridge and pneumatic pressure controller and (iii) a closed acrylic chamber with temperature contro...")
- 10:49, 16 April 2023 Joebijujosep talk contribs created page Common 3D Printing Materials (Created page with "==Polydimethylsiloxane (PDMS)== 3D printing is widely used to print polydimethylsiloxane ('''PDMS''') based microfluidic devices. 3D rapid prototyping fabrication technique maintains the desirable permeability and bio-compatibility of PDMS. The ink for 3D printing PDMS can be prepared by blending a shear thinning PDMS material, and a low-viscosity PDMS material. After desired mixing, the final PDMS inks were loaded into a syringe barrel at room temperature. Using a 3D bi...")
- 08:38, 16 April 2023 Joebijujosep talk contribs created page Types of 3D Printing (Created page with "==Types of Printing== There are many different technologies to do 3D printing. Since 2010, the American Society for Testing and Materials ('''ASTM''') carried out the “ASTM F42 – Additive Manufacturing” standards<sup>[2]</sup>. Those standards are used to classify the additive manufacturing processes into 7 categories<sup>[2]</sup>. Those 7 categories are<sup>[2]</sup> [https://3dprinting.com/what-is-3d-printing/]: # Vat Photopolymerisation ##Stereolithograph...")
- 08:37, 16 April 2023 Joebijujosep talk contribs created page 3D Printing Overview (Created page with "{{Template:CHEM-ENG590E}} ==Terminology== thumb|right|250px|Figure 1: CAD image of a teacup; additional rendering shows differences in final build due to differences in layer thicknesses<ref name="gibson" /> 3D printing is the colloquial term for the rapid prototyping process formally known as additive manufacturing or rapid prototyping<ref name="gibson">Gibson, I., Rosen, D. & Stucker, B. Additive Manufacturing Technology. in Additive Man...")
- 19:47, 12 April 2023 Joebijujosep talk contribs created page 3D Printing - Joe (Created page with "{{Template:CHEM-ENG590E}} ==Terminology== thumb|right|250px|Figure 1: CAD image of a teacup; additional rendering shows differences in final build due to differences in layer thicknesses<ref name="gibson" /> 3D printing is the colloquial term for the rapid prototyping process formally known as additive manufacturing or rapid prototyping<ref name="gibson">Gibson, I., Rosen, D. & Stucker, B. Additive Manufacturing Technology. in Additive Man...")
- 11:20, 25 March 2023 Joebijujosep talk contribs created page File:CO2 Storage CO2GeoNet.png (CO2 Storage Processes)
- 11:20, 25 March 2023 Joebijujosep talk contribs uploaded File:CO2 Storage CO2GeoNet.png (CO2 Storage Processes)
- 10:48, 25 March 2023 Joebijujosep talk contribs created page File:Capillary Number Table.jpg (Reproduced version of Capillary Number from literature. https://perminc.com/resources/fundamentals-of-fluid-flow-in-porous-media/chapter-2-the-porous-medium/multi-phase-saturated-rock-properties/dominance-capillary-forces-viscous-forces/capillary-number/)
- 10:48, 25 March 2023 Joebijujosep talk contribs uploaded File:Capillary Number Table.jpg (Reproduced version of Capillary Number from literature. https://perminc.com/resources/fundamentals-of-fluid-flow-in-porous-media/chapter-2-the-porous-medium/multi-phase-saturated-rock-properties/dominance-capillary-forces-viscous-forces/capillary-number/)