User:Hannah Harvey/Notebook/CHEM-471 Fall 2016/2016/10/18

From OpenWetWare
Jump to: navigation, search
Owwnotebook icon.png Project name Report.pngMain project page
Resultset previous.pngPrevious entry      Next entryResultset next.png

Objectives

  1. Run UV-vis for 18 samples with lysozyme as the protein. Full concentration details can be found below under Data.

Description

  1. Test solutions made according to below concentrations under Data.
  2. On 10-12-16, solutions were placed into the oven at 80°C for 4 hours.
  3. UV-vis data was run on each of the 18 samples of different pHs and fructose concentrations.
  4. After each individual sample was run, the sample was saved and the cuvette cleaned out twice with soap, twice with H2O, twice with HCl, and twice more with H2O. The cuvette was then dried thoroughly.

Data

UV-vis solutions
101816 UVvis Conc Fruc .125mM.png
Table 1 UV-vis solutions made for [Fructose]=.125mM with silver

101816 UVvis Conc Fruc .25mM.png
Table 2 UV-vis solutions made for [Fructose]=.25mM with silver


101816 Abs v Wave Fruc .125mM.png

Figure 1 Absorbance v wavelength of lysozyme in 0.125 mM concentration of fructose

101816 Abs v pH Fruct .125mM.png

Figure 2 Absorbance at 279 nm at various pH's in 0.125 mM concentration of fructose

101816 Abs v Wave Fruc .25mM.png

Figure 3 Absorbance v wavelength of lysozyme in 0.25 mM concentration of fructose

101816 Abs v pH Fruc .25mM.png

Figure 4 Absorbance at 279 nm at various pH's in .25 mM concentration of fructose

Notes

All Figures in the above data are baseline and water corrected.
After taking the UV-vis samples out of the 80°C oven, pH 11 for both Fructose concentrations showed a precipitate form. pH 12 did not show this precipitate.