TorontoMicrofluidicsFoundry
The Toronto Microfluidics Foundry is a part of the brand-new Centre for Microfluidic System in Chemistry and Biology (CMS). It provides a flexible environment for the fabrication and integration of polymer-based microfluidic devices and consists of two dedicated Class 1000 cleanroom spaces. Users need to be trained according to the UofT Health and Safety regulations as well as individually at the equipment and need to attend monthly user meetings. Fulfilling these requirements is a prerequisite for maintaining active user status.
Foundry use is available for a user fee. The facility has been established with financial support from the Canada Foundation of Innovation, the Ontario Ministry for Research & Innovation, and the National Sciences and Engineering Research Council of Canada.
EQUIPMENT SIGN-UP & RESERVATION
The purposes of signing up for equipment is: 1) to keep track of user hours for financial management of the facility 2) to make sure equipment is available when you need it. Please DO NOT FORGET to sign up for the equipment you will use (or have used).
NEW RESERVATION SYSTEM
This new system allows you to reserve each equipment for the time needed. http://foundry-reserv.mie.utoronto.ca/
To view all equipments booking of the day: http://foundry-reserv.mie.utoronto.ca/today.asp?lab=8
Please contact the Process Technology Committee (PTC-Foundry[at]mie[dot]utoronto[dot]ca) to get your new username and password set up.
Note: you need to email the Process Technology Committee (PTC-Foundry[at]mie[dot]utoronto[dot]ca) to process after hours/on weekends.
NEWS
New users must attend the training session after the monthly Foundry meeting prior to any fabrication. Fabrication hours are Monday to Friday, 9:00 A.M. to 5:00 P.M. After hours and weekend usage is not permitted.
LOCATION: MC405, Phone: 8-6851
PEOPLE
List and contact information of active users of the facility, and for the process technology committee (PTC)
This is a multi-user facility that is supported by a number of UofT research groups. You should adhere to the lab rules (safety, signup, participation in joint info/cleaning sessions) in order to maintain active user status. Click here for a list of active users.
The PTC is designed to maintain and improve process standards at the Toronto Microfluidic Foundry. Click here for a list of current members. General functions of the PTC are:
- Approve requests for any new fabrication process
- Provide suggestions for (changes in) user policies and fabrication protocols where needed
- Match new users with experienced ones for training
- Make suggestions for improvements of the facility and set priorities with respect to equipment upgrade/ acquisition of new equipment
- Provide short updates at Foundry Meetings
- Discussion through our LISTERV account is also encouraged: MICROFLUIDICSFOUNDRY-L[at]listserv[dot]utoronto[dot]ca
For all inquires about facility and access, or new users please contact the PTC at PTC-foundry<at>mie<dot>utoronto<dot>ca
MEETINGS AND TRAINING
Please note that either attending the monthly meetings or informing us when you can't make it is mandatory for ALL users. Training sessions are held after monthly meetings and are mandatory for new users.
New User Form: http://mfl.mie.utoronto.ca/PDF/CMS-Fab-Form-2012.pdf
Upcoming meetings:
Wednesdays Jan. 16,Feb. 13, March 13, and April 17, 2013 @ 4pm in MC404A
SUPPLIES NEEDED
Please contact the PTC if supplies are running low.
PURCHASING INFORMATION
. Consumables
. Photomasks
. Other Equipment
Contact information for spin coater maintenance: Don Stephens Technical Support SCS 7645 Woodland Dr. Indianapolis, IN. 46278 Ph.: 317-244-1200 ext. 260 Fax: 317-240-2739 E-mail: dstephens@scscoatings.com
RECIPE DUMP
Dump your numbered fabrication recipes here. Recipe Dump
LAB SAFETY
Access to the foundry requires users to be compliant with the UofT health and Safety regulations and to be individually trained at the equipment. Users that don't fulfill these requirements are denied access.
Waste will be picked up from the Foundry on every second Monday starting March 10, 2008.
There are separate containers for liquid chemical waste under the fume hood. Please separate your liquid waste accordingly.
There is a sharp's box beside the waste container. Sharps (glass, needles, blades, etc.) are to be disposed here, NOT in regular waste.
Bulk SU-8 and liquid PDMS waste are to be disposed of in their respective bags in the blue oil drum outside the cleanroom. This is NOT to be disposed of in regular waste.
EVENTS
- SmallTalks Event: TBA
OTHER FACILITIES
ECTI - UofT's Central Cleanroom - Bahen Center (BA), 7th floor
Center for Imaging Cellular Function (UHN, PMH), 2nd floor Discovery Tower at MaRS
Institute for Optical Sciences (excimer laser facilities), 3rd floor, Physics Building Side Wing
Dolomite, commercial vendor for microfluidic glass chips related to microreactor company Syrris, UK
Micronit, Commercial independent vendor for microfluidic glass chips, NL