Difference between revisions of "User:Allison K. Alix/Notebook/CHEM-581/2013/02/06"

From OpenWetWare
Jump to: navigation, search
(Procedure)
(Procedure)
Line 20: Line 20:
  
 
2) Dissolve 0.5 g PVOH (MW= 89,000-98,000 g/mol) in 3mL phosphate buffer. Heat @ 100°C for 15 minutes with stirring.
 
2) Dissolve 0.5 g PVOH (MW= 89,000-98,000 g/mol) in 3mL phosphate buffer. Heat @ 100°C for 15 minutes with stirring.
 +
 +
3) Add 2μL R6G in 2mL phosphate buffer to the PVOH/buffer mixture. Be sure to mix thoroughly.
 +
 +
4) Add 100mL Mineral Oil (CVS, 99.9%) to a homogenizer and subsequently add the PVOH mixture. Homogenize for ~5minutes to form a w/o emulsion
 +
 +
5) Pour final w/o emulsion into a beaker and place in a freezer at -20°C for 20 hours. Remove and allow thawing for 4 hours. Repeat this cycle for a total of three cycles.
  
 
==Calculations==
 
==Calculations==

Revision as of 08:46, 6 February 2013

BDLlogo notext lr.png Experimental Chemistry <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>


Objective

-Begin PVA microsphere preparation

Procedure

1) Prepare 20mM phosphate buffer (pH=7.4)

Dissolve 1.256 g disodium phosphate and 1.337 g monosodium phosphate in ~900mL water. Add sodium hydroxide to obtain pH of 7.4 (~100mL)

2) Dissolve 0.5 g PVOH (MW= 89,000-98,000 g/mol) in 3mL phosphate buffer. Heat @ 100°C for 15 minutes with stirring.

3) Add 2μL R6G in 2mL phosphate buffer to the PVOH/buffer mixture. Be sure to mix thoroughly.

4) Add 100mL Mineral Oil (CVS, 99.9%) to a homogenizer and subsequently add the PVOH mixture. Homogenize for ~5minutes to form a w/o emulsion

5) Pour final w/o emulsion into a beaker and place in a freezer at -20°C for 20 hours. Remove and allow thawing for 4 hours. Repeat this cycle for a total of three cycles.

Calculations

Preparation of 20mM phosphate buffer, pH = 7.4

[Base] = monosodium phosphate, 119.98 g/mol [Acid] = disodium phosphate, 141.96 g/mol

pH = pKa + log ([Base]/[Acid])

7.4 = 7.3 + log ([Base]/[Acid])

([Base]/[Acid]) = 1.2589

[Acid] + [Base] = 20mM

[Base] = 20mM - [Acid]

(20mM - [Acid])/[Acid] = 1.2589

[disodium phosphate] = 8.85mM

[monosodium phosphate] = 11.14mM

8.85mmol x 141.96g/mol x 1mol/1000mmol = 1.256g disodium phosphate

11.14mmol x 119.98g/mol x 1mol/1000mmol = 1.337g monosodium phosphate

References

http://www.sciencedirect.com/science/article/pii/S0168365998000893


Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.