- New experiment procedure
- Running 150 seconds for a total of 10 minutes and then stopping the imaging but keeping the switch running for another 20 minutes before imaging for 10 minutes and then switching for 20 and then imaging for 10 minutes
- 3 sets of imaging 20 minutes apart with the switch going the whole time
- then wait an hour and 30 minutes
- then do 10 mins again (153)
experiment started @ 15:00:39
semi Periods are T1 = 150.00s, T2 = 150.00s.
all relays set to OFF @15:00:39
state set to ON @15:03:09
state set to OFF @15:05:39
state set to ON @15:08:09
state set to OFF @15:10:39
state set to ON @15:13:09
state set to OFF @15:15:39
state set to ON @15:18:09
state set to OFF @15:20:39
state set to ON @15:23:09
state set to OFF @15:25:39
state set to ON @15:28:09
state set to OFF @15:30:39
state set to ON @15:33:09
state set to OFF @15:35:39
state set to ON @15:38:09
state set to OFF @15:40:39
state set to ON @15:43:09
state set to OFF @15:45:39
state set to ON @15:48:09
state set to OFF @15:50:39
state set to ON @15:53:09
state set to OFF @15:55:39
state set to ON @15:58:09
state set to OFF @16:00:39
state set to ON @16:03:09
state set to OFF @16:05:39
state set to ON @16:08:09
state set to OFF @16:10:39
state set to ON @16:13:09
state set to OFF @16:15:39
state set to ON @16:18:09
state set to OFF @16:20:39
state set to ON @16:23:09
state set to OFF @16:25:39
state set to ON @16:28:09
state set to OFF @16:30:39
state set to ON @16:33:09
state set to OFF @16:35:39
assymmetric cycling terminated by user @ 16:37:31
after 19 cycles
experiment started @ 18:10:45
semi Periods are T1 = 150.00s, T2 = 150.00s.
all relays set to OFF @18:10:46
state set to ON @18:13:16
state set to OFF @18:15:46
state set to ON @18:18:16
state set to OFF @18:20:46
state set to ON @18:23:16
assymmetric cycling terminated by user @ 18:23:25
after 22 cycles
| 
Project name
Main project page
Previous entry Next entry
