User:Madeleine Y. Bee/Notebook/Single Molecule Fluorescence/2013/07/01: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
Line 6: Line 6:
| colspan="2"|
| colspan="2"|
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==May 25, 2013==
==May 26, 2013==
===Coating AuNPs with Silica===
===Coating AuNPs with Silica===
from [http://pubs.acs.org/doi/full/10.1021/la0347859 A General Method To Coat Colloidal Particles with Silica]
from [http://pubs.acs.org/doi/full/10.1021/la0347859 A General Method To Coat Colloidal Particles with Silica]

Revision as of 13:11, 24 May 2013

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

May 26, 2013

Coating AuNPs with Silica

from A General Method To Coat Colloidal Particles with Silica

Chemicals Needed

  • TES (tetraethyl orthosilicate)
  • PVP (Poly(vinylpyrrolidone))
  • Ethanol
  • Acetone
  • Ammonia (29.3 wt % NH3 in water)
  • Hydrofluoric acid

Procedure

Part One: Adsorption of PVP

  • Calculate the amount of PVP to provide the colloids with 60 PVP molecules per nm2
  • Dissolve the PVP in water by ultrasonication for 15 minutes
  • Combine the calculated amount of PVP with AuNPs and stir at 600 rpm for 24 hours at room temperature
  • Centrifuge solution and remove supernatant
  • Re-disperse the sediment in a solution of ammonia in ethanol

Part Two: Growth of the Silica Shell

  • Add an amount TES solution (10 vol % in ethanol) depending on the desired thickness of the silica shell, while stirring at 600 rpm
  • Stir reaction mixture for 12 hours

Calculations