User:Tamra L. Fisher/Notebook/Experimental Biological Chem/2011/10/11

From OpenWetWare
Jump to: navigation, search
BDLlogo notext lr.png AU Biomaterials Design Lab Report.pngMain project page
Resultset previous.pngPrevious entry      Next entryResultset next.png


Objective

Make a four lead plate.

Description

  1. Glue short wire to Teflon surface with CircuitWorks® 5 Minute Conductive Epoxy.
  2. Glue small, rectangular palladium leads on top of the wire with CircuitWorks® 5 Minute Conductive Epoxy. (arranged in the order: 2, 3, 1, 4)
    • Dimensions of palladium leads:
      • 1- 11.1 by 2.6 = 28.86mm2
      • 2- 10.8 by 3.3 = 35.64mm2
      • 3- 9.4 by 2.9 = 27.26mm2
      • 4- 9.9 by 3.3 = 32.67mm2

Data

  • The set-up was not dry after four hours.

Notes