User:Matthew R Skorski/Notebook/471 - Exp BioChem/2015/10/14

From OpenWetWare
Jump to navigationJump to search
Owwnotebook icon.png Project name Report.pngMain project page
Resultset previous.pngPrevious entry      Next entryResultset next.png


To analyze the activity of proteinase k at 100 nM using fluorescence


The guide for analyzing a protease with fluorescence can be found here at Dr. Hartings notebook

  1. Prepping AuNP Fiber Samples
    1. 7 AuNP fiber samples were spun at 300 RPM for 10 minutes
    2. The supernatant was removed but the fibers were retained
    3. Protinase K tube 11 was mixed with 1 mL of 50 mM Tris and 10 mM CaCl2 pH 8 buffer
      1. Protinase K concentration: (0.00107g)*(1mol/28,900g)*(1/0.001L)= 0.00003702 M Protinase K
      2. Amount of Proteinase K solution needed for 1mL with 1μM concentration: M1*V1 = M2*V2 => (37.02 μM)*(V1) = (100 nM)*(1 mL) => V1 = 0.0027 mL
      3. Amount of Buffer solution need to get to 1mL: (1mL total)-(0.0027 mL Protinase K solution) = 0.9973 mL buffer
  2. Incubating Samples
    1. 2.7 μL Protinase K and 997.3 μL buffer were mixed in the 7 fiber tubes as well as 7 blank eppendorf tubes
    2. Eppendorf tubes were incubated on a shaker in a 37°C water bath for 10 minutes, 15 minutes, 30 minutes, 45 minutes, 1 hrs, 1.5 hrs, and 2 hrs for one of the fiber tubes and one of the blanks.
  3. Running Samples
    1. Once the time for a sample was up the tube was centrifuged at 12000 rpm for 1 minute to collect the remaining fibers
    2. From either the sample or blank, 20uL was taken and placed in a 600uL eppendorf tube
      1. Added 140uL of Assay Buffer
      2. Added 40uL of Assay Reagent
    3. Taking Measurement
      1. Excitation at 390 nm
      2. Emission from 400 to 650 nm
      3. Both slit widths set to 10 nm
      4. Scan Speed of 200


The image below shows the intensity for the fluorescence of samples A though H and blanks A through H from 400 to 650 nm. 2015 10 14 Fluorescence of Raw Data.png

To find the concentrations of peptide released at the various time intervals the samples and blanks had the area of their intensity integrated from 420 nm to 650 nm. The equation (Wavelength2 - Wavelength1)/2*0.5 was used and the sums of each interval totaled. The samples were then corrected for by subtracting the total area of the blank from the total area of the sample. The resulting intensities were then used to calculate the concentrations based off the calibration curve made on 10/07/15. The graph below shows the concentrations of the peptides as a function of time.

2015 10 14 Fluorescence Concentrations.png