User:M Jaffe/Notebook/Au Nanofibers with Rhodamine/2016/03/15
|Project name||Main project page|
Previous entry Next entry
Figure 1: UV-Vis spectra for 0.1-1 μM Rhodamine B standards. All standards peaked at 555 nm except for samples of concentrations 0.2, 0.3, and 0.5 μM which peaked at 553 nm. The differences in absorbances between these two wavelength's were 1/1000th of an absorbance unit (which may simply be the result of instrument noise or the way the instrument rounds absorbance values to the thousandths place.
Figure 2: UV-Vis calibration curve for Rhodamine B. From the figure above, it was evident that the linear range for UV-Vis of Rhodamine B may end at around 0.6 μM. Below that concentration, the UV-Vis response is far less predictable. As a result, higher concentration samples were analyzed.
Figure 3: UV-Vis spectra for 2-10 μM Rhodamine B standards. Higher concentrations of Rhodamine B were used to determine if these concentrations could be used practically and analyzed using UV-Vis.
Figure 4: UV-Vis calibration curve for Rhodamine B at higher concentrations. The figure above shows a calibration curve that extends the concentrations of Rhodamine B used. Note that the calibration curve is linear and under 1 absorbance unit up to 10 μM Rhodamine B. This indicates that UV-Vis analysis could be a better option to determine the amount of Rhodamine B incorporated by AuNP fibers since higher and more manageable concentrations can be used with the UV-Vis.