User:Jacob Esenther/Notebook/581/2014/10/22

From OpenWetWare
< User:Jacob Esenther‎ | Notebook‎ | 581‎ | 2014‎ | 10
Jump to: navigation, search
BDLlogo notext lr.png Biomaterials Design Lab Report.pngMain project page
Resultset previous.pngPrevious entry      Next entryResultset next.png



Objective

Learn how to maintain an OpenWetWare Notebook.

Description

  1. PVA Absorption against BPA
    1. Making the BPA
      1. 10.4mg of BPA and dissolved in 5mL of Methanol
      2. once dissolved, diluted in 1000mL volumetric flask using DI water
    2. Preparing Vials
      1. Vials were massed with and without films
      2. 10mL of BPA was added to each vial
      3. Measurements are to be taken at various increments
  2. Finishing Exchanged Clay
    1. after drying, the exchange clays were scraped off of the watch glass
    2. they were pulverized with a mortar and a pestle
    3. completed were Choline Chloride and TBHT exchanged clays

Data

' ' Mass (g) Volume (ml) Density (g/ml) ' Average
PVA-Clay 1 0.04610 0.0370 1.245945946
PVA-Clay 2 0.10271 0.0832 1.234495192 1.263170302
PVA-Clay 3 0.11258 0.0860 1.309069767
PVA 1 0.03294 0.0253 1.301976285
PVA 2 0.03726 0.0222 1.678378378 1.580299627
PVA 3 0.05176 0.0294 1.760544218

Notes

This area is for any observations or conclusions that you would like to note.


Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.