From OpenWetWare
Jump to: navigation, search
SJK 22:31, 15 September 2009 (EDT)
22:31, 15 September 2009 (EDT)
The format of your summary is great, good job. Future labs will have more results, but I think you have the right idea here.

Links to lab notebook and procedure used

The procedures used in this lab may be found here. Oscilloscope lab

The measurements and notes I took may be found here. Oscilloscope lab notebook day 1

Only one day of notes was recorded for this lab.

Purpose of the lab

The main goal of the lab was to become comfortable using an oscilloscope and its different settings to take measurements.

Summary of my data

SJK 22:25, 15 September 2009 (EDT)
22:25, 15 September 2009 (EDT)
You have a typo here (53 ms = 0.053 s). Also, you could have gone further talking about the uncertainty. You do have the two values, both of which you think are reliable, but why do you choose 52.76 ms? Also, in the future, you'll learn how many digits should be used when reporting final values. Reporting 24.01 ms implies that you're confident about the last digit, which probably isn't true.

The fall time found using the cursors was 51ms and using measure was 52.76ms. The two methods are fairly close so are likely reliable. From this I found the RC constant to be

RC = T/2.197 = .5276 ms/2.197 = .2401 seconds or 24.01ms.

What I learned

From this lab I learned a lot about how to view and take measurements using an oscilloscope and the function generator. At the beginning I had almost no experience with either and by the end was able to navigate through all the menus and measurement options fairly quickly. Though this lab was more to become comfortable with the equipment, if doing a similar process I would try moving around on the waves displayed to see how much the measure function of the oscilloscope varies to find places to reduce error.

Also I if doing the lab again I'd take more pictures as some pictures of the oscilloscope screen while taking measurements would have been nice but at the time didn't think to get any. These could have helped show the error in measure if the screen isn't set up correctly for the measurement of fall time. In future labs it'll probably just be a good idea to take as many pictures as possible.SJK 22:27, 15 September 2009 (EDT)
22:27, 15 September 2009 (EDT)
I LOVE your discussion of pictures and your plan to take lots of pictures in future labs! Great idea!!!