User:Trisha I. Ibeh/Notebook/Trisha Notebook/2013/09/03

From OpenWetWare
< User:Trisha I. Ibeh‎ | Notebook‎ | Trisha Notebook‎ | 2013‎ | 09
Revision as of 15:52, 9 September 2013 by Trisha I. Ibeh (talk | contribs) (Description)
Jump to: navigation, search
BDLlogo notext lr.png Biomaterials Design Lab <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

The template for this lab can be seen from Dr. Hartings lab. Values are altered to accurately describe the lab that was conducted on this day. The template can be found here


The molar absorptivities of two different molecules, adenosine and inosine were determined in this lab using UV-Vis and Beer's law. The changes in UV-Vis spectra will be observed to determine changes in concentration of both adenosine and inosine. In order to do this, we will need to know the molar absorptivity (ε) of both of these molecules. A calibration curve from the class data will be created. From this data the the standard deviation, Confidence Interval (90% and 95% confidence) will be calculated and Grubb's test will be performed to determine the outlier.


Stock Solutions

You are going to need to make two stock solutions, one for each molecule. Adenosine has a molecular weight of 267.24g/mol; inosine has a molecular weight of 268.2g/mol. You should confer with your group members how you want to prepare these stock solutions and prepare sample calculations for dilutions. (That is ... come in prepared to make these! I don't want people discussing for 30minutes how they want to do this.) I These stock solutions should be prepared such that you can make the following solutions:

Adenosine solution concentrations (M) Inosine solution concentrations (M)
3.00x10-5 4.80x10-5
2.50x10-5 4.00x10-5
2.00x10-5 3.20x10-5
1.50x10-5 2.40x10-5
1.00x10-5 1.60x10-5
0.50x10-5 0.80x10-5

For the RANDOM sample, I want each group to make an unknown (it will be known inside of the group, but not outside of the group) for each molecule. I want a different group to see if they can determine the calculation of your unknowns from the calibration curve that we put together as a class.

Absorption Spectra Each group will have a cuvette to work with. Take a spectrum of each of your samples along with a blank. Be sure to be considerate of everyone who wants to use the spectrometer. You will need to rinse your cuvette between each sample. Within each group, I want you to be prepared for how you are going to do this as well. Not everyone needs to be filling cuvettes, taking spectra, cleaning cuvettes, converting data. Talk among yourselves for how your group is going to handle the data collection and analysis. You're working in teams ... people should have roles (even if you are rotating samples, with one person collecting the data for sample A, then another person taking sample B, etc)! As you are collecting data, you NEED to be importing it into Excel and correcting it (subtracting the blank spectrum).

Calibration Curve and Group work As a large group, determine what wavelengths you want to use for your adenosine and inosine calibration curves (A vs c). Choose two people (one for each molecule) to compile your A(λ) and concentration data from each group. Do a least squares fit to the data and determine the slope of the line (remember the intercept should be zero --- with a concentration of 0 there should be no absorbance). This data, once compiled should be shared with all of the group members (via dropbox).

Determine the standard deviation for your data points.

Determine the confidence interval for 90% and 95% confidence.

Determine if any data can be ruled out using a Q-test.

Unknown Groups should exchange unknowns and try to determine the concentration of these unknowns from the calibration curves. In a week, I want you to revisit this data and propagate the error from the calibration curve to your concentration calculation. After making your calculation, find out from the group, whose unknown you are using, what the calculation of their samples should be.


This area is for any observations or conclusions that you would like to note.

Use categories like tags. Change the "Course" category to the one corresponding to your course. The "Miscellaneous" tag can be used for particular experiments, as instructed by your professor. Please be sure to change or delete this tag as required so that the categories remain well organized.