User:Pranav Rathi/Notebook/OT/2010/08/02/x & y Signal Drift Issue

From OpenWetWare
< User:Pranav Rathi‎ | Notebook‎ | OT‎ | 2010‎ | 08‎ | 02
Revision as of 14:00, 2 August 2010 by Pranav Rathi (talk | contribs) (→‎Steps)
Jump to navigationJump to search

under work

Setup & procedure

Steps

  1. Measure the beam waist (2 x W=1.5) at the eyepiece lens of the telescope.
  2. Setup the (1:1) telescope: In this case two planoconvex lenses (f=38.1mm of both) are used.
  3. Measure the beam waist again (2 x W =1.5) at QPD, to make sure that the ratio is 1:1.
  4. Straighten the beam after the telescope, using two aperture techniques [[1]].
  5. Setup the QPD on the xyz translation stage.
Retrieved from "https://openwetware.org/mediawiki/index.php?title=User:Pranav_Rathi/Notebook/OT/2010/08/02/x_%26_y_Signal_Drift_Issue&oldid=438896"