User:Pranav Rathi/Notebook/OT/2010/08/02/x & y Signal Drift Issue: Difference between revisions
From OpenWetWare
Jump to navigationJump to search
Pranav Rathi (talk | contribs) (→Steps) |
Pranav Rathi (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
under work | |||
===Setup & procedure=== | ===Setup & procedure=== | ||
====Steps==== | ====Steps==== |
Revision as of 13:59, 2 August 2010
under work
Setup & procedure
Steps
- Measure the beam waist (2 x W=1.5) at the eyepiece lens of the telescope.
- Setup the (1:1) telescope: In this case two planoconvex lenses (f=38.1mm of both) are used.
- Measure the beam waist again (2 x W =1.5) at QPD, to make sure that the ratio is 1:1.
- Straighten the beam after the telescope, using two aperture techniques [[1]].
- Setup the QPD in the xyz translation stage.