Difference between revisions of "User:Moira M. Esson/Notebook/CHEM-571/2013/09/03"

From OpenWetWare
Jump to: navigation, search
(Objectives)
(Objectives)
Line 11: Line 11:
 
# Prepare calibration curves for adenosine and inosine.
 
# Prepare calibration curves for adenosine and inosine.
 
<br>
 
<br>
==Preparation of Adenosine Stock solution
+
==Preparation of Adenosine Stock solution==
 
#In a clean 50mL volumetric flask, add 0.200g adenosine. Fill the volumetric flask with deionized H<sub>2</sub>O up until the white line.
 
#In a clean 50mL volumetric flask, add 0.200g adenosine. Fill the volumetric flask with deionized H<sub>2</sub>O up until the white line.
 
#*'''Note''': To ensure the full addition of all of the adenosine, a small amount of deionized H<sub>2</sub>O was placed on the weigh boat and a pipette was used to remove all of the H<sub>2</sub>O on the weigh boat.s
 
#*'''Note''': To ensure the full addition of all of the adenosine, a small amount of deionized H<sub>2</sub>O was placed on the weigh boat and a pipette was used to remove all of the H<sub>2</sub>O on the weigh boat.s
Line 52: Line 52:
 
  | 8||1.5E-4||0.5||0.75E-5||10||  
 
  | 8||1.5E-4||0.5||0.75E-5||10||  
 
  |}
 
  |}
 +
<br>
 +
==Notes==
 +
*Originally the adenosine stock solution was prepared
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
|}
 
|}
  
 
__NOTOC__
 
__NOTOC__

Revision as of 10:21, 3 September 2013

Owwnotebook icon.png Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Objectives

  1. Prepare adenosine solutions of various concentrations to determine the molar absorptivity of adenosine.
  2. Prepare inosine solutions of various concentrations to determine the molar absorptivity of inosine.
  3. Prepare calibration curves for adenosine and inosine.


Preparation of Adenosine Stock solution

  1. In a clean 50mL volumetric flask, add 0.200g adenosine. Fill the volumetric flask with deionized H2O up until the white line.
    • Note: To ensure the full addition of all of the adenosine, a small amount of deionized H2O was placed on the weigh boat and a pipette was used to remove all of the H2O on the weigh boat.s
  2. Cap the volumetric flask and shake the volumetric flask vigorously until the adenosine is completely dissolved.
    • Note:The solution should be shaken vigorously for a minimum of 5 minutes.
  3. Pour the solution into a 50mL falcon tube for later storage.
  4. Dilute the solution by taking the necessary volume of the solution (using an automated pipette), placing the solution into the appropriately sized volumetric flask, and add deionized H2O.


  • Stock Solution Preparation for Adenosine
Total Mass [g] Stock Volume [mL] Concentration [M]
0.2006 50 0.015


  • Serial Dilution of Adenosine Stock Solution
Dilution 'M1'[mol/L] 'V1' [mL] 'M2'[mol/L] 'V2' [mL]
1 0.015 0.1 1.5E-4 10
2 0.015 0.25 3.0E-5 10
3 1.5E-4 1.667 2.5E-5 10
4 1.5E-4 1.333 2.0E-5 10
5 1.5E-4 1.0 1.5E-5 10
6 1.5E-4 0.667 1.0E-5 10
7 1.5E-4 0.333 0.5E-5 10
8 1.5E-4 0.5 0.75E-5 10


Notes

  • Originally the adenosine stock solution was prepared