User:Mobeen Ashraf/Notebook/Chem-581/2012/11/02

From OpenWetWare
< User:Mobeen Ashraf‎ | Notebook/Chem-581‎ | 2012‎ | 11
Revision as of 16:12, 30 November 2012 by Mobeen Ashraf (talk | contribs) (Notes)
Jump to: navigation, search
BDLlogo notext lr.png Experimental Chemistry <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>


Objective

  • Make 1:1 ratio of sulfate ions solution ( H2SO4, Fe2(SO4)3, FeSO4, Na2SO4, Al2(SO4)3).
  • Adsorption through films similar to clay films instead of clay :
    • 1.04 g Fe(II) Cl, 0.5 g Iron Sulfate, 1 film, and 40 ml H2O.
    • To precipitate iron oxide out of the solution NaOH ( 2.67 g in 10 ml H2O) was added drop wise with stirring.
    • The solution was then filtered using vacuum filtration and left to dry.
  • Add film with Porphyrin and glutaraldehyde to 1% solution of HCl and leave out until the next working day.

Description

The following sulfate/porphyrin solutions were prepared and the absorbance was measured for each one between 200 and 800 nm by using UV/VIS instrument:

1) 1mL 50μM Na2SO4, 1mL 5μM porphyrin, 2 mL HPLC H2O

2) 1mL 50μM Fe2(SO4)3, 1mL 5μM porphyrin, 2 mL HPLC H2O

3) 1mL 50μM FeSO4, 1mL 5μM porphyrin, 2 mL HPLC H2O

4) 1mL 50μM H2SO4, 1mL 5μM porphyrin, 2 mL HPLC H2O

5) 1mL 50μM Al2(SO4)3

Data

UV-VIS Curve for Porphyrin sulfate solutions..png

Notes

Note: The graph in the data section is a courtesy of Allison Alix.