Difference between revisions of "User:Megan L. Channell/Notebook/Masters Research/2013/10/24"

From OpenWetWare
Jump to: navigation, search
(Protocol)
Line 15: Line 15:
 
##1.0 % - 0.9904 g PLA, 0.0099 g MOF-5, 10 mL dichloromethane
 
##1.0 % - 0.9904 g PLA, 0.0099 g MOF-5, 10 mL dichloromethane
 
##5.0 % - 0.9497 g PLA, 0.0495 g MOF-5, 10 mL dichloromethane
 
##5.0 % - 0.9497 g PLA, 0.0495 g MOF-5, 10 mL dichloromethane
##10.0 % - 0.9000 g PLA, 0.9899 g MOF-5, 10 mL dichloromethane
+
##10.0 % - 0.9000 g PLA, 0.9899 g MOF-5, 10 mL dichloromethane
 
##0 % - 0.999 g PLA, 10 mL dichloromethane
 
##0 % - 0.999 g PLA, 10 mL dichloromethane
 
#XXXXX each sample in a plastic vial until dissolved completely.
 
#XXXXX each sample in a plastic vial until dissolved completely.
 
#Once dissolved, poured into molds to set.
 
#Once dissolved, poured into molds to set.
 +
 +
==Note==
 +
The 10% is not 10% because there was too much MOF-5.  This needs to be re-done.
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
|}
 
|}
  
 
__NOTOC__
 
__NOTOC__

Revision as of 17:29, 27 October 2013

Owwnotebook icon.png Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

PLA Film

  • Make Polylactic acid (PLA) film with MOF-5 that was made here.

Protocol

  1. 0.1 %, 0.5 %, 1.0 %, 5.0 %, 10 % and 0 % w/v.
    1. 0.1 % - 0.9993 g PLA, 0.0013 g MOF-5, 10 mL dichloromethane
    2. 0.5 % - 0.9951 g PLA, 0.0052 g MOF-5, 10 mL dichloromethane
    3. 1.0 % - 0.9904 g PLA, 0.0099 g MOF-5, 10 mL dichloromethane
    4. 5.0 % - 0.9497 g PLA, 0.0495 g MOF-5, 10 mL dichloromethane
    5. 10.0 % - 0.9000 g PLA, 0.9899 g MOF-5, 10 mL dichloromethane
    6. 0 % - 0.999 g PLA, 10 mL dichloromethane
  2. XXXXX each sample in a plastic vial until dissolved completely.
  3. Once dissolved, poured into molds to set.

Note

The 10% is not 10% because there was too much MOF-5. This needs to be re-done.