Difference between revisions of "User:Mary Mendoza/Notebook/CHEM572 Exp. Biological Chemistry II/2013/01/23"

From OpenWetWare
Jump to: navigation, search
(Calculation of reagents for ADA kinetic assay)
(Calculation of reagents for ADA kinetic assay)
Line 6: Line 6:
 
| colspan="2"|
 
| colspan="2"|
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==Calculation of reagents for ADA kinetic assay==
 
* It was decided to prepare a 30 mM stock solution of adenosine. The calculation below shows the amount needed to obtain 30 mM of adenosine.
 
 
.030  <math>\frac{mol}{L}</math> mol of adenosine × <math>\frac{267.24  g}{1  mol}</math> = <math>\frac{8.0172 g}{L}</math> × .010 L = 0.0802 g of adenosine
 
 
 
The calculations on the bottom are courtesy of [[User:Dhea Patel/Notebook/CHEM 572: ADA&Inhibitor Kinetics/2013/01/23|Dhea Patel]].
 
 
[[Image:ADA_kinetics_table.png|px80]]
 
 
 
The calculation of for the buffer was formulated by [[User:Catherine Koenigsknecht/Notebook/Experimental Biological Chemistry/2013/01/23|Catherine Koenigsknecht]].
 
 
* Procedure: Buffer
 
#Protocol for 0.1 M Sodium Phosphate Buffer (pH 7.4)
 
#Add 3.1 g of NaH2PO4•H2O and 10.9 g of Na2HPO4 (anhydrous) to distilled H2O to make a volume of 1 L. The pH of the final solution will be 7.4. This buffer can be stored for up to 1 mo at 4°C.
 
#Dilute to 0.05M: (take 50 mL of 1M solution and dilute in 1 Liter H2O)
 
  
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->

Revision as of 15:09, 8 May 2013

Owwnotebook icon.png Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>