# Difference between revisions of "User:Keyun Wang/Notebook/Experimental Biological Chemistry I/2012/10/23"

Experimental Biological Chemistry I <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

## Purpose

• Clean up and make room for samples of Lysozyme/Gold solutions
• Make stock solutions for Luminol assay experiment tomorrow: Luminol, Horseradish peroxidase, H2O2, sodium carbonate buffer.

## Procedure

• Test tubes and falcon tubes were washed for clean up.
• A serious of stocks solutions were made for testing luminol experiment the next day.
• Phenol: concentration of 18mM 4-Iodophenol was not made because about 18mM phenol stock solution pre-made from 2012/09/18 (check this data entry for calculations made and actual concentration of phenol) is going to be used for luminol assay due to its long shelf life in room temperature.
The weighted out amount was mixed with 1mL of sterile water.
Molecular weight of horseradish peroxidase is 66kDa.
Calculation is depicted as follows:
0.004g X 66,000g/mol ÷ 0.001L = 9.2X10-6M = 9.2μM
• Carbonate buffer
Carbonate buffer was made by mixing 100mL of 1M sodium bicarbonate with 100mL of 1M sodium bicarbonate together.
pH of carbonate buffer was diluted by adding 1M and 6M HCl into the solution
For calculations done to obtain the amount of grams weighted out the sodium carbonate and sodium bicarbonate, please consult Melissa's Notebook.
Molecular weight of sodium carbonate: 105.9784g/mol
0.0106g X 105.9784g/mol ÷ 0.1L = 1X10-3M = 1mM sodium carbonate
Molecular weight of sodium bicarbonate: 84.007g/mol
0.0084g X 84.007g/mol ÷ 0.1L = 1X10-3M = 1mM sodium bicarbonate
The 100mL of 1M sodium bicarbonate is mixed with 100mL of 1M sodium carbonate in a 1000mL graduated cylinder. pH was taken with a pH meter and the pH turned out to be 10.5.
Initially 1M HCl was added drop wise into the carbonate buffer mix. About 50mL of 1M HCl was added to carbonate buffer mix to adjust the pH to 9.5. Then, 6M HCl was added to speed up pH adjustment process. About 10mL of 6N HCl was added drop wise to adjust the pH to 8.5.
Please refer to Melissa's Notebook for calculations on determining the new molar concentration of carbonate buffer. The final concentration of carbonate buffer is calculated to be 0.833mM. Thus, 256mL of 0.833mM carbonate was made for luminol assay the next day.