Difference between revisions of "User:Karlena L. Brown/Notebook/PVOH Research/2013/02/27"

From OpenWetWare
Jump to: navigation, search
(Autocreate 2013/02/27 Entry for User:Karlena_L._Brown/Notebook/PVOH_Research)
(No difference)

Revision as of 09:51, 27 February 2013

Owwnotebook icon.png PVOH Research <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>      </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

PVOH Film Preparations

Prepared PVOH films in water:

  • In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)

(Actual Mass = 0.4934g)

  • Then, using a graduated cylinder add ~ 3 mL H2O to the beaker
  • In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)

(Actual Mass = 0.9965g)

  • Then, using a graduated cylinder add ~ 5 mL H2O to the beaker

Standard PVOH Film Protocol:

  • After adding and combining PVOH (MW 130,000) in small beakers with H2O, add stir bars and prepare to stir solution.
  • On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
  • Once PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.

Notes:

  • An additional 2-3 mL H2O was added to each solution to aid the dissolving of the PVOH
  • Heat was reduced when solutions began to boil too rapidly
  • While transferring solutions to Teflon dishes, loss of sample within the small beakers (sample loss = incomplete sample transfer)