Difference between revisions of "User:Karlena L. Brown/Notebook/PVOH Research/2012/09/28"

From OpenWetWare
Jump to: navigation, search
(Autocreate 2012/09/28 Entry for User:Karlena_L._Brown/Notebook/PVOH_Research)
 
(PVOH Film Preparations)
Line 6: Line 6:
 
| colspan="2"|
 
| colspan="2"|
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==PVOH Film Preparations==
+
==OBJECTIVES==
'''Prepared PVOH films in water:'''
+
# Run X-ray Diffraction of 2:1 Clay-α-Fe<sub>2</sub>O<sup>4</sup>
* In 10mL beaker, weigh out ~ 0.5 grams PVOH (MW 130,000)
+
# Calculate the amount of Na<sup>+</sup> ions in the 2000ppm SO<sub>4</sub><sup>2-</sup> solution
'''(Actual Mass = 0.4934g)'''
+
# Calculate the amount of Cu<sup>2+</sup> ions in the 2000ppm SO<sub>4</sub><sup>2-</sup> solution
* Then, using a graduated cylinder add ~ 3 mL H<sub>2</sub>O to the beaker
+
# Calculate the amount of Na<sup>+</sup> ions in the 20ppm SO<sub>4</sub><sup>2-</sup> solution
* In another 10mL beaker, weigh out ~ 1.0 gram PVOH (MW 130,000)
+
# Calculate the amount of Cu<sup>2+</sup> ions in the 20ppm SO<sub>4</sub><sup>2-</sup> solution
'''(Actual Mass = 0.9965g)'''
 
* Then, using a graduated cylinder add ~ 5 mL H<sub>2</sub>O to the beaker
 
  
'''Standard PVOH Film Protocol:'''
+
==X-Ray Diffraction Instructions==
* After adding and combining PVOH (MW 130,000) in small beakers with H<sub>2</sub>O, add stir bars and prepare to stir solution.
+
==Na<sup>+</sup> and Cu<sup>2+</sup> Ion Calculations in 2000ppm SO<sub>4</sub><sup>2-</sup> Solutions==
* On hot plate, stir and heat both beaker solutions at 70-80°C for ~ 12 min or until PVOH dissolves.
+
==Na<sup>+</sup> and Cu<sup>2+</sup> Ion Calculations in 20ppm SO<sub>4</sub><sup>2-</sup> Solutions==
* Once PVOH solids thoroughly dissolve in solution, pour each solution in a Teflon dish to sit, cool, and dry in a fume hood for ~ 1 day.
 
  
 
'''Notes:'''
 
'''Notes:'''

Revision as of 22:27, 4 October 2012

Owwnotebook icon.png PVOH Research <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

OBJECTIVES

  1. Run X-ray Diffraction of 2:1 Clay-α-Fe2O4
  2. Calculate the amount of Na+ ions in the 2000ppm SO42- solution
  3. Calculate the amount of Cu2+ ions in the 2000ppm SO42- solution
  4. Calculate the amount of Na+ ions in the 20ppm SO42- solution
  5. Calculate the amount of Cu2+ ions in the 20ppm SO42- solution

X-Ray Diffraction Instructions

Na+ and Cu2+ Ion Calculations in 2000ppm SO42- Solutions

Na+ and Cu2+ Ion Calculations in 20ppm SO42- Solutions

Notes:

  • An additional 2-3 mL H2O was added to each solution to aid the dissolving of the PVOH
  • Heat was reduced when solutions began to boil too rapidly
  • While transferring solutions to Teflon dishes, loss of sample within the small beakers (sample loss = incomplete sample transfer)