Difference between revisions of "User:Ellen Petersen/Notebook/MOF/2012/04/16"

From OpenWetWare
< User:Ellen Petersen‎ | Notebook‎ | MOF‎ | 2012‎ | 04
Jump to: navigation, search
(Autocreate 2012/04/16 Entry for User:Ellen_Petersen/Notebook/MOF)
 
(Entry title)
Line 6: Line 6:
 
| colspan="2"|
 
| colspan="2"|
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==Entry title==
+
==April 16, 2012==
* Insert content here...
+
* 1.) Add solids 1,4,5,8 Naphthalenetetracarboxylic dianhydride (.805 g, 3.00 mmol) and 4-aminopyridine (.847 g, 6.00 mmol)to round bottom flask
 +
* 2.) Add 150 mL of solvent (DMA) ~keep under hood~
 +
* 3.) Add Stir Bar to solution
 +
* 4.) Put under spout and raise black knob until there is enough pressure to hold it in place
 +
* 5.) Begin to stir
 +
* 6.) Vacuum out oxygen : turn big end of nossle up, observe that solution does react
 +
* 7.) Turn off vacuum and turn on nitrogen: turn little end of nossle up. Bubbles in back should appear, this means nitrogen is on
 +
* 8.) Turn on heat to 56, switch down accordingly until it reaches 135 degrees consistently.
 +
* 9.) If solution seems to be boiling adjust and turn down
 +
*10.) Solution stable at 133 degrees at 51, mark red line on it to see difference in solution level.  
  
  

Revision as of 21:33, 4 February 2013

Owwnotebook icon.png Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>

April 16, 2012

  • 1.) Add solids 1,4,5,8 Naphthalenetetracarboxylic dianhydride (.805 g, 3.00 mmol) and 4-aminopyridine (.847 g, 6.00 mmol)to round bottom flask
  • 2.) Add 150 mL of solvent (DMA) ~keep under hood~
  • 3.) Add Stir Bar to solution
  • 4.) Put under spout and raise black knob until there is enough pressure to hold it in place
  • 5.) Begin to stir
  • 6.) Vacuum out oxygen : turn big end of nossle up, observe that solution does react
  • 7.) Turn off vacuum and turn on nitrogen: turn little end of nossle up. Bubbles in back should appear, this means nitrogen is on
  • 8.) Turn on heat to 56, switch down accordingly until it reaches 135 degrees consistently.
  • 9.) If solution seems to be boiling adjust and turn down
  • 10.) Solution stable at 133 degrees at 51, mark red line on it to see difference in solution level.