Difference between revisions of "User:Dhea Patel/Notebook/Experimental Biological Chemistry Notebook/2012/09/25"

From OpenWetWare
Jump to: navigation, search
(Autocreate 2012/09/25 Entry for User:Dhea_Patel/Notebook/Experimental_Biological_Chemistry_Notebook)
 
(Objective)
Line 17: Line 17:
 
==Objective==
 
==Objective==
  
#To make biocompatible protein films with specific reactive sites
+
*to make 4, 1L [[AU_Biomaterials_Design_Lab:Materials/LB|LB]] solutions in Fernbach flasks and 4, 35mL LB solutions in 250mL flasks,
#Explore the solution conditions (pH, ionic strength, buffer, stabilizers)  that produce stable protein – gold nanoparticle suspensions
+
*to autoclave them for 1.5 hours, and
 +
*to add cells and antibiotics to the solutions.
  
 +
In addition,
 +
*to remake luminol and HRP solutions, and
 +
*to rerun fluorescence at 510nm on the luminol, hydrogen peroxide, phenol, and HRP mixture.
 +
 +
==Description==
 +
 +
'''*Preparing [[AU_Biomaterials_Design_Lab:Protocols/Starter_Culture_Media|Starter Culture Media]]'''
 +
**0.8752g, 0.8754g, 0.8751g, and 0.8756g of LB were added to four separate 250mL Erlenmeyer flasks.
 +
**35.0mL H<sub>2</sub>O was added to each flask.
 +
**The flasks were covered with foil and labeled.
 +
 +
'''*Preparing [[AU_Biomaterials_Design_Lab:Protocols/Expression_Culture_Media|Expression Culture Media]]'''
 +
**25.0015g, 25.0013g, 24.9991g, and 24.9998g of LB were added to four separate Fernbach flasks.
 +
**1.0L H<sub>2</sub>O was added to each flask.
 +
**The flasks were covered with foil and labeled.
 +
 +
'''*[[AU_Biomaterials_Design_Lab:Protocols/Autoclave|Autoclaving]]'''
 +
**The power was turned on
 +
**Water was poured into the chamber manually because the water pipe was clogged.
 +
**The black knob was set to STE (sterilize)
 +
**2 Fernbach and 2 Erlenmeyer flasks were loaded into the chamber.
 +
**The autoclave door was closed and sealed shut.
 +
**The temperature was set to about 121°F
 +
**The autoclave was set to run for an hour.
 +
**After the hour had elapsed, the flasks were left to sit in the autoclave for 30 minutes so the pressure in the autoclave could return to atmospheric pressure.
 +
**The black know was turned to off
 +
**Gloves were used to unload the sterilized material.
 +
 +
 +
'''*Preparing Luminol Solution'''
 +
**The same protocol as [[User:Dhea_Patel/Notebook/Experimental_Biological_Chemistry_Notebook/2012/09/19|last week]] was used to prepare the luminol solution.
 +
**0.00443g of luminol was measured out, so the calculations for actual concentration from last week are accurate.
 +
**Actual Concentration: 2.5 × 10-3 M in H<sub>2</sub>O.
 +
**0.0800 grams of Sodium Carbonate was added to the luminol solution so that the luminol would dissolve in the solution.
 +
**0.4800 grams of sodium bicarbonate was added to the solution to adjust the pH.
 +
 +
'''*Preparing HRP Solution'''
 +
*1mg of HRP was added to 1mL water, creating a 23μM HRP solution.
 +
*The HRP was further diluted to 2.3μM by adding 1mL HRP solution to 9mL H<sub>2</sub>O.
  
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
 
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->

Revision as of 10:08, 25 September 2012

<!-- sibboleth --><div id="lncal1" style="border:0px;"><div style="display:none;" id="id">lncal1</div><div style="display:none;" id="dtext"></div><div style="display:none;" id="page">User:Dhea Patel/Notebook/Experimental Biological Chemistry Notebook/2012/09/25</div><div style="display:none;" id="fmt">yyyy/MM/dd</div><div style="display:none;" id="css">OWWNB</div><div style="display:none;" id="month"></div><div style="display:none;" id="year"></div><div style="display:none;" id="readonly">Y</div></div>

BDLlogo 300.png <sitesearch>title=Search this Project</sitesearch>

Customize your entry pages <html><img src="/images/a/aa/Help.png" border="0" /></html>

Objective

  • to make 4, 1L LB solutions in Fernbach flasks and 4, 35mL LB solutions in 250mL flasks,
  • to autoclave them for 1.5 hours, and
  • to add cells and antibiotics to the solutions.

In addition,

  • to remake luminol and HRP solutions, and
  • to rerun fluorescence at 510nm on the luminol, hydrogen peroxide, phenol, and HRP mixture.

Description

*Preparing Starter Culture Media

    • 0.8752g, 0.8754g, 0.8751g, and 0.8756g of LB were added to four separate 250mL Erlenmeyer flasks.
    • 35.0mL H2O was added to each flask.
    • The flasks were covered with foil and labeled.

*Preparing Expression Culture Media

    • 25.0015g, 25.0013g, 24.9991g, and 24.9998g of LB were added to four separate Fernbach flasks.
    • 1.0L H2O was added to each flask.
    • The flasks were covered with foil and labeled.

*Autoclaving

    • The power was turned on
    • Water was poured into the chamber manually because the water pipe was clogged.
    • The black knob was set to STE (sterilize)
    • 2 Fernbach and 2 Erlenmeyer flasks were loaded into the chamber.
    • The autoclave door was closed and sealed shut.
    • The temperature was set to about 121°F
    • The autoclave was set to run for an hour.
    • After the hour had elapsed, the flasks were left to sit in the autoclave for 30 minutes so the pressure in the autoclave could return to atmospheric pressure.
    • The black know was turned to off
    • Gloves were used to unload the sterilized material.


*Preparing Luminol Solution

    • The same protocol as last week was used to prepare the luminol solution.
    • 0.00443g of luminol was measured out, so the calculations for actual concentration from last week are accurate.
    • Actual Concentration: 2.5 × 10-3 M in H2O.
    • 0.0800 grams of Sodium Carbonate was added to the luminol solution so that the luminol would dissolve in the solution.
    • 0.4800 grams of sodium bicarbonate was added to the solution to adjust the pH.

*Preparing HRP Solution

  • 1mg of HRP was added to 1mL water, creating a 23μM HRP solution.
  • The HRP was further diluted to 2.3μM by adding 1mL HRP solution to 9mL H2O.