Difference between revisions of "User:Allison K. Alix/Notebook/Thesis Research/2013/10/29"

From OpenWetWare
Jump to: navigation, search
Line 63: Line 63:
V =4/3(π)r<sup>3</sup>
V =4/3(π)r<sup>3</sup>
  = 4/3(π)(6.98x10<sup>-7</sup>)<sup>3</sup>
  = 1.42x10<sup>-18</sup> x 1000L/1m<sup>3</sup>
= 4/3(π)(6.98x10<sup>-7</sup>)<sup>3</sup>
  = 1.42x10<sup>-15</sup>L
= 1.42x10<sup>-18</sup> x 1000L/1m<sup>3</sup>
= 1.42x10<sup>-15</sup>L

Revision as of 09:13, 30 October 2013

Owwnotebook icon.png Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

To Do

  • Calculate percentage of MB open using FCS curves
  • Run 10000X green beads to obtain average diffusion time.

Calculating %MB open


N = 7.9 particles

7.9 particles x 1 mol/6.02x1023 particles x 1/6.93 x 10-16L = 1.89x10-8M

NOTE: 6.93x10-16 is the focal volume of the spot, previous calculated

1.89x10-8M x 1nM/10-9M = 18.9nM

Actual concentration of this sample was 22.4nM (According to dilution calculations)

%MB open = 18.9nM/22.4nM x 100% = 84.4nM

  • This is a very large percentage that is open. All other calculations show similar results with the lowest %open being 69%. Because the beacon is specifically designed NOT to fluoresce when closed, there may be something else contributing to these high percentages. First, the width of the spot needs to be recalculated as 10-16 is a bit small (usually around 10-15). To recalculate this, 9 samples of 10000X diluted green beads will be run on the FCS for 3 minutes at a time to obtain an average diffusion time. This can then be substituted into the equation relating ω0 and τD.
  • The second thing to check is that the known concentration of MB is actually what was calculated. Although these samples were made straight from a stock solution with a known concentration, there could have been error during preparation, that is affecting the actual concentration that is not being accounted for. To check the concentrations, new MB samples will be prepared, and their UV-Vis spectra will be obtained


Green bead igor curve.png

The above image is an FCS curve showing the average diffusion time of 9 10000X diluted green bead samples. τD was calculated to be 58.7ms


radius of the spot

τD = (ω023ηπd)/4kT

where τD is the diffusion time of the sample

ω0 is the radius of the spot

η is the viscosity of the solvent (water), 0.001028kg/m s

d is the diameter of the particle

k is Boltzmann's constant = 1.3806488 × 10-23 m2 kg s-2-2 K-1

T is the temperature of the room (18.7 °C, 291.7K)

ω0 = sqrt([(0.05874s(4)(1.3806488x10-23m2kg/s2K)(291.7K)]/[3(0.001028kg/m s)(π)(2x10-7m)])

ω0 = 0.698μm

volume of the spot

V =4/3(π)r3

= 4/3(π)(6.98x10-7)3

= 1.42x10-18 x 1000L/1m3

= 1.42x10-15L