# Difference between revisions of "User:Allison K. Alix/Notebook/Thesis Research/2013/06/05"

Silica Procedure Prep <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

## Procedures

Part 1: Preparing solutions for coating AuNP with Silica

1) dissolve 0.716g PVP (10kg/mol) in 10mL water (0.00716M)

2) Dissolve 0.42mL NH4OH (29.3wt% NH3 in H2O) in 9.58mL Ethanol (200 proof) (4.2vol%)

NOTE: TES solution will be prepared immediately prior to use to minimize exposure

Part 2: Preparing ZnPPIX solutions

Zinc protoporphyrin (ZnPPIX) samples will be prepared at the same concentrations, following the same procedure as the ThT samples.

2.22μM ZnPPIX and 1.11265μM DNA

(5μM)V=(4.44μM)(300μL)

V=266.4μL 5μM ZnPPIX in 33.6μL

(53.1μ)V=(2.2253μM)(300μL)

V=12.57μL DNA in 287.43μL

ZnPPIX, DNA and AuNP

2[ThT]:1[DNA]→ 2.068μM ZnPPIX

10% of 250μL=25μL (within 10% allows for accurate concentration comparison)

Total solution volume: 275μL

(2.068×10-6M)(275×10-6L)=5.31476×10-10moles ZnPPIX

(5.31476×10-10moles)/(25×10-6L)=21.3μM ZnPPIX

• Make 21.3μM ZnPPIX:

(5000μM)V=(21.3μM)(25μL)

V=0.107μL in 24.9μL

• Add 25μL of 21.3μM ZnPPIX to 250μL DNA/AuNP solution

Concentrations:

DNA- 0.94μM

AuNP- 12.55nM

ZnPPIX- 1.9364μM

2.22μM ZnPPIX

(5μM)V=(2.22μM)(300μL)

V=133.2μL ZnPPIX in 166.8μL

## Notes

To do:

• Prepare new ZnPPIX/DNA sample and take fluorescence (it is curious that there was no fluorescence seen in this sample)
• Prepare AuNP/ZnPPIX sample and take fluorescence (be sure that the fluorescence seen in the AuNP/DNA/ZnPPIX sample is not due to an AuNP/ZnPPIX interaction)
• Dilute beads 10X and 100X more, there was WAY too much signal and no curve seen in FCS measurements