Difference between revisions of "User:Alexander Cvitan/Notebook/Experimental Biological Chemistry Lab/2014/03/04"

From OpenWetWare
Jump to: navigation, search
(Figures)
(Preparing Samples for Atomic Absorption)
Line 13: Line 13:
 
===Preparing Samples for Atomic Absorption===
 
===Preparing Samples for Atomic Absorption===
 
* To the 30:1 lysozyme-AuNP samples synthesized with salts, 2.71 mL of the variables were added. Three concentrations for each were tested: 100 mM, 10 mM, and 1 mM.  
 
* To the 30:1 lysozyme-AuNP samples synthesized with salts, 2.71 mL of the variables were added. Three concentrations for each were tested: 100 mM, 10 mM, and 1 mM.  
::* For 2,2 bipyridine, the concentrations were 9 mM, 0.9 mM, and 0.09 mM.  
+
* For 2,2 bipyridine, the concentrations were 9 mM, 0.9 mM, and 0.09 mM.  
* The samples were left to sit at room temperature overnight.  
+
* The samples were left to sit at room temperature overnight.
  
 
==Figures==
 
==Figures==

Revision as of 14:44, 17 April 2014

BDLlogo notext lr.png Biomaterials Design Lab: Spring 2014 <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Objective

  • Add the following variables to the 30:1 lysozyme-AuNPs synthesized without salts: NaCl, KCl, MgCl2, CaCl2, 2,2 bipyridine, MES, citric acid.
  • Run UV-Vis of 30:1 lysozyme:AuNP (with variables added after baking) that were cooled to 4°C over the weekend.

Procedure

Preparing Samples for Atomic Absorption

  • To the 30:1 lysozyme-AuNP samples synthesized with salts, 2.71 mL of the variables were added. Three concentrations for each were tested: 100 mM, 10 mM, and 1 mM.
  • For 2,2 bipyridine, the concentrations were 9 mM, 0.9 mM, and 0.09 mM.
  • The samples were left to sit at room temperature overnight.

Figures

  • Please Note that the Control Wasn't Diluted With Variable Like the Other Samples. Also the Control Used is the Control at Room Temperature, not at 4 Degrees.

Screen Shot 2014-03-13 at 2.35.34 PM.png Screen Shot 2014-03-13 at 2.35.49 PM.png Screen Shot 2014-03-13 at 2.36.04 PM.png Screen Shot 2014-03-13 at 2.36.19 PM.png Screen Shot 2014-03-13 at 2.36.33 PM.png Screen Shot 2014-03-13 at 2.36.47 PM.png Screen Shot 2014-03-13 at 2.37.07 PM.png

  • Based off of all UV-Vis data: The ABS for the controls were corrected for the dilution factor present and the percent AuNP's in solution was calculated.

Screen Shot 2014-03-26 at 2.55.49 PM.png

Notes

Observations of 30:1 lysozyme-AuNP Samples Cooled to 4°C With Variables Added After Synthesizing

3.4.observations.png