Difference between revisions of "Paulsson:Electrocompetent E.coli v2"

From OpenWetWare
Jump to: navigation, search
m (Evaluation)
m (Materials)
Line 9: Line 9:
Performing resuspension steps in the cold room can't hurt... <br>
Performing resuspension steps in the cold room can't hurt... <br>
What you need:
Freshly streaked E.coli strain (e.g. MC1061 = PMB12)<br>
Freshly streaked E.coli strain (e.g. MC1061 = PMB12)<br>
3L LB medium<br>
3L LB medium<br>

Revision as of 13:42, 1 October 2012

Home        Group Meeting        Protocols        Inventory        Journal Watch        Top 100        Links        Facts of Life       

Modified from version 1: Larger volumes; spins in Corning conical centrifuge bottles; slower spins


  • Ice cold means ice cold, no exceptions. Cold is the key to high transformation efficiency!!!!

All containers and solutions should be pre-chilled in ice-water baths, and pipets pre-chilled in a freezer when practical
Performing resuspension steps in the cold room can't hurt...

Freshly streaked E.coli strain (e.g. MC1061 = PMB12)
3L LB medium
5L H2O, ice cold
500ml 10% glycerol, ice cold
6x 500-ml centrifuge bottles
8x 50-ml polypropylene conical tube
~65x microcentrifuge tubes
18x 10ml pipets
10x 25ml pipets
4x 500ml graduated cylinders
Beckman JS-4.2 rotor (or equivalent) and adapters, pre-cooled to 2°C

  • Pre-chill all tubes, tips, pipets, and cylinders.

Prepare the cells

1. Inoculate a single colony of E. coli cells into 40 ml LB medium. Grow overnight at 37°C with moderate shaking.

2. Inoculate 15 ml of the culture into 3L LB medium, split into two 4L flasks. Grow at 37°C, shaking at ~200 rpm, to an OD600 of ~0.5 to 0.7. MC1061 grows slowly, takes ~4 hours.

3. Chill cells in an ice-water bath 20 to 30 min; swirl occasionally to mix (every ~5 min). Transfer to pre-chilled 500-ml centrifuge bottles.

Cells should be kept at 2°C for all subsequent steps.

4. Centrifuge cells 20 min at 3400 rpm in Beckman J-4.2, 2°C.

5. Pour off supernatant and add 10 ml ice-cold water to each bottle. Vortex briefly (~5s) and return to ice-water bath. Do for each bottle, then repeat. Using a pre-chilled pipet, resuspend the pellet, then add 400 ml ice-cold water and mix well.

6. Centrifuge cells as in step 4, increasing the speed to 3600 rpm.

7. Pour off supernatant, resuspend the pellet as above, and add another 380 ml ice-cold water, mix well, and

8. Centrifuge again as in step 4, increasing the speed to 3900 rpm.

8. Pour off supernatant as bottles are removed from centrifuge. Resuspend the pellet with 10 ml 10% glycerol. Transfer to 50 ml conicals. Rinse the bottle with an additional 30 ml 10% glycerol and transfer to the same conical tube, mixing.

9. Centrifuge 10 min at 3900 rpm in Beckman JS-4.2 rotor and adaptors, 2°C.

10. Aspirate supernatant carefully (pellet not entirely stable). Estimate the pellet volume (~1 ml from 500 ml culture) and add an equal volume of ice-cold 10% glycerol. Resuspend cells on ice using wide-mouth P1000 tips (cut ~5mm from tip). Place ~105 µl aliquots of cells into pre-chilled microcentrifuge tubes and freeze on dry ice (not in liquid nitrogen). Store at –80°C.

Prolonged incubation of cells in ice-water at all stages can increase transformation efficiency of some strains, such as BW313/P3 and MC1061/P3, >3-fold.