From OpenWetWare
Revision as of 07:05, 29 September 2008 by Nikolai.windbichler (talk | contribs)
Jump to: navigation, search
Click here to visit our NEW WEBSITE
The content below is most likely out of date. We also have a new lean and mean openwetware area.

List of printers

Note: all printers print double sided (duplex) - if you have problems getting this to work, please ask Bob.

Kafatos/Christophides Printers

HP Color LaserJet 4700dn on in 6th floor lab
HP LaserJet 2430 (b/w) on in 6th floor lab
HP LaserJet 2015 (b/w) on in Room 520

Crisanti Printers

HP Laserjet 2200 Series PCL 5 (b/w) on in 5th floor lab
HP Laserjet 2200 Series PCL 5 (b/w) on in 4th floor


Please please please: replace toner when needed (shake and replace first - sometimes this gets another 1000 pages!) - and put the old cartridge and box on Bob or Yasmeen's desk so that we can re-order well before your next major deadline.

Windows Vista: Instructions for setting up a printer

  1. Click on "Add a printer" in the control panel under "Printers"
  2. Click on "Add a network, wireless or bluetooth printer"
  3. The printer will not be in the list so select "Add a printer using a TCP/IP adress or hostname"
  4. Paste IP adress (e.g. or hostname (e.g. bio-fckprn.saf.ic.ac.uk) and click OK once

Windows XP: Instructions for setting up a printer

  1. In the control panel under "Printers and Faxes" click "Add printer"
  2. Select "Local Printer attached to this computer" but unselect the tickbox for P&P below
  3. Choose "Create a new port" and select "Standard TCP/IP Port"
  4. Paste IP adress (e.g. or hostname (e.g. bio-fckprn.saf.ic.ac.uk) and click Next
  5. Select manufacturer and model and then click next (Note that there is a generic "HP LaserJet" driver that you can use)
  6. Click next a few times (You do not need to share your printer) and then finish

MacOS: instructions for setting up a printer

  1. Open "System Preferences" and select "Print & Fax"
  2. Click on the plus sign (+) below the printers list
  3. Click on "IP" in the top panel
  4. Paste IP adress (e.g.
  5. Wait until it says "Valid and complete address"
  6. Click "Add" and then "Continue" on the next screen

Alternative method: (doesn't seem to work for some people/versions)

  1. Open Utilities -> Printer Setup Utility
  2. Select "Default Browser"
  3. Enter "Room 520" in search box
  4. Find and select printer
  5. Click OK a few times

At least one of our printers (room 520) will wait for you to press a button on the actual printer before printing a "Letter" document on A4 paper if you are using a mac. If your Mac has "Letter" paper as default in "Page Setup" for all applications, you can change this: Go to Applications → Utilities → Printer Setup Utility → Preferences. Change the default paper option to A4.

It should work... please don't all print a test-page!