IGEM:American University/2009/Notebook/Advanced Experimental Chemistry: Fun Times in Beeghly/2013/02/04

From OpenWetWare
Revision as of 10:39, 6 February 2013 by Noah Benjamin (talk | contribs) (Today's Procedure)
Jump to: navigation, search
Igem-logo-150px.png iGEM Project name 1 <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

Welcome to Advanced Experimental Chemistry

Today's Procedure

1) Crosslinking the 5 isopropanol, pvoh, glutaraldehyde films made on Friday done by the same procedure previously used to crosslink.

2) Making more glutaraldehyde fixant: 1L distilled water + 2 mL H2SO4 + 20 g sodium sulfate stirred on stir plate to dissolution (stored in 4 250mL plastic bottles).

3) Beginning the Synthesis of the Quaternary Amine: 10 mL acetonitrile + 1.148 mL chlorobutanol + 0.753 mL triethylamine in a round bottom flask. Flask was placed on a heating mantle (set to 50 of 100V) and a sand bath and was attached to a redox condenser apparatus [nitrogen gas was allowed to flow through the redox condenser such that the reaction occurs under nitrogenous conditions]. Reaction is run for 3 days.


After the crosslinking, most of the films were flimsy and breaking. This could be because the films were too thin or bc the isopropanol evaporate before crosslinking. The experiment will be redone with phenol instead of isopropanol and 1g PVOH instead of 0.5g.