- 1 Lentivirus, shRNA plasmid, or siRNA?
- 2 TECHNICAL SERVICE CALLER GUIDE: siRNA
- 3 TECHNICAL SERVICE GUIDE: Lentivirus
- 4 Transient shRNA Transfection
- 5 Stable shRNA Transfection
- 6 shRNA Transfer Vector Transfection Reagents
- 7 shRNA Transfer Vector Transient Transfection Procedure
- 8 Lentivrus Infection
- 9 shRNA Controls
- 10 Factors Influencing Successful Transfection
- 11 References
Lentivirus, shRNA plasmid, or siRNA?
Choosing between Lentivirus, shRNA transfer vector, or siRNA, depends on what you are seeking to accomplish. What advantage is there for you to create a stable knockdown versus a transient knockdown? If you are running your RNAi on an easy to transfect cell line, under a transient RNAi event, then siRNA is a well defined, proven and effective method. If you are working with a primary cell, neuron, or generally hard to transfect cell, then lentiviral particles for introducing shRNA is attractive. The shRNA transfer vector alone in theory should be easy to work with insofar as culturing the cell, DNA transfection, antibiotic selection, and then collect data. However the true purpose of the lentivirus transfer vector is for packaging into lenti particles.
Establishing a stable knockdown phenotype is feasible with the use of lentiviral particles. Viral particles that have a VSV-G coat protein (Santa Cruz Biotechnology Inc.) will have broad tropism. Otherwise if you are studying effects that can be measured with transient knockdown, then siRNA is a more simple and straightforward approach. siRNA is a user friendly technique since you can calculate empirical moles of duplex/# cells or total volume (molarity), with a minimal number of steps and peripheral controls toward achieving results.
shRNA transfer vectors are ~7 kb DNA constructs that can give less stability problem since it is DNA instead of RNA. However there are considerable nuances in the actual design and cloning of these vectors, in the actual establishment of antibiotic resistance toward generating a stable cell, and in controlling for the specific silencing/reproducible results. shRNA has limitations due to the nature of having such a large delivery vector producing a small hairpin substrate, and over cell passages under antibiotic selective pressure (ie puro resistance may not = Pol III shRNA cassette expression).
TECHNICAL SERVICE CALLER GUIDE: siRNA
Catalog # Lot #
1) Optimize the transfection reagent; measure transfection efficiency of the transfection reagent with FITC-siRNA.
2) Measure knockdown in a range of cell densities ( 30-80%) within 24-72 hours
3) Measure knockdown in a range of siRNA concentrations (30-90 nM) within 24-72 hours
Providing suggestions outlined in the notes below is worth considering and may bring success.
- What are the experimental results?
- Describe how gene knockdown is measured? qPCR / Western / IF
- How was the RNA reconstituted?
NOTE: siRNA ships lyophilized along with RNase free water with instructions to reconstitute with 330 ul of H2O to make 10 uM solution. Having the correct molarity of the solution is critical.
- Molarity of siRNA vialed: 10 uM ( uM/L )
- Volume after reconstitution: 330 uL
- Mass of 1 mole of siRNA: 13800 g/mol ( 21nt X 660 g/base pair)
- Total mols per vial: 10 um/L X 330 uL = 3.3 nm
- Total grams per vial: 3.3 nm X 13800 g/mol = 45.5 ug
- Solution concentration: 45.5 ug/ 330 uL = 0.138 ug/uL
- Did this same vial or other lot of siRNA work in the past?
NOTE: If the siRNA same cat# has worked in the past, and now does not work, this may suggest RNase contamination. There are ways to determine this by running 1 pmol (17 ng) siRNA in a native 2% agarose gel, however replacing the vial is a straightforward solution.
- Describe the cell type for this experiment?
- What transfection reagent is used for the siRNA tranfection?
NOTE: Cationic lipid based transfection reagents (ie Lipofectimine, L2000, Transit TKO, Oligofect, Dharmafect, sc-29528) are each one a unique formula. Certain cell types will respond better to certain cationic lipid (positive charge lipophilic) reagents. For this reason, measuring transfection efficiency is necessary.
- How was transfection efficiency measured?
NOTE: The researcher may have an existing transfection reagent that works on their cells in other experiments (ie cDNA). Suggest to try the same reagent and measure transfection efficiency.
- What time point was transfection uptake of FITC-siRNA measured?
NOTE: Measuring transfection efficiency with sc-36869 will validate that liposome-dependent siRNA entry into the cells is taking place efficiently. It is important to measure transfection efficiency 5-7 hours post transfection since this is when the optimum time point where most transfection takes place. Common methods are IF or Flow cytomtetry.
- Adherent cell (grows on the surface of the plate): What is the cell confluency at time of transfection?
- Suspension cell (ie leukocytes/lymphocytes, cells are suspended in the media) : How many cell count # used to seed the well?
NOTE: A hemocytometer (cell counter) is common for counting cells for seeding into multiwell plates (6, 12, 24 well); originally designed for performing blood cell counts. Cell density is an important parameter for knockdown. Optimum cell density will vary and typically falls between 30-80%. NOTE: Setting up a 6 or 12 well experiment and trying a range of cell confluencies (30, 50, 70%), will reveal an optimal cell density where knockdown is optimal with minimal cell death. Effective confluence can range from 30-80%.
- What nanomolar concentration(s) of siRNA are tested?
NOTE: Setting up a 6 or 12 well experiment and trying a range of cell confluencies (30, 50, 70%) & a range of siRNA concentrations (30, 60, 90 nM) will reveal an optimal convergence of cell density and concentration of siRNA where knockdown is optimal with minimal cytotoxicity (cell death).
- What time points is RNAi measured?
NOTE: 48 hours post transfection is a relevant singular point. Measuring knockdown for a few time points in the 24-72 hour window may indicate the frame when RNAi is most optimal. Titrating the siRNA concentration (30-90 nM) for the cells will indicate the best amount to see an effect.
- How is RNAi measured? Western blot - IF - qPCR - other
NOTE: For WB, titrating the antibody may reveal subtle changes in knockdown. For IF, running secondary controls may indicate nonspecific fluorescence mistaken for signal.
- Quantitative RT-PCR, which primers were used and what type of system?
NOTE: With appropriate internal controls (GAPDH, DNA contamination control), qPCR can be very reliable in determining translation initiation arrest.
TECHNICAL SERVICE GUIDE: Lentivirus
Catalog # Lot #
1) Determine if the VSV-G coat protein has tropism toward the target cell; measuring transduction efficiency with sc-108084 2) Measure a range of MOI (5-10+) 3) Measure knockdown within 48-72 hours after puromycin selection
Measure transduction efficiency
- Transduction in what cell type?
- Primary cell or Continuous/immortal cell?
NOTE: Primary cell cultures are first generation cells from a living organism and typically have less than 5 passage lifespan. Lenti is popular for primary cells since they are difficult to transfect. Continuous or immortalized cells have the ability to proliferate indefinitely in culture.
- Is this cell type known to have tropism for VSV-G coat protein?
- How is transduction efficiency measured for tropism to VSV-G?
- If a copGFP expressing Lentivirus was used to measure tropism, at what time point was transduction efficiency of the copGFP Control Lentiviral Particles or other reporter measured?
NOTE: 48 hours post-transduction is the time point where puromycin selection begins. This is also a good time point to evaluate transduction efficiency by measuring copGFP fluorescence inside the cells.
- How was the reporter gene measured? (FCM, IF, other)
Multiplicity of Infection (MOI)
X = How many cell count was transduced? NOTE: A hemocytometer is common for this step; originally designed for performing blood cell counts, contains a etched grid on a slide, count cells/square in 5-10 squares, then average out the number and extrapolate. Y = How many uL of virus was used? NOTE: MOI = X / (Y * (particles/uL)). HEK293T and other easy to transduce cells (MOI of 5-20), while neuronal cells,SHSY5Y, may require MOI of 10-50.
- How many [ug/ml] puromycin is added at what time point post transduction?
- How was optimum puromycin concentration determined?
NOTE: The minimum antibiotic concentration to use is the lowest concentration that kills 100% of non-transfected cells in 3-5 days from the start of puromycin selection (normal range; 1-10 ug/ml). Add puromycin 48 hours post transduction.
- Western blot, IF or Quantitative RT-PCR?
- Negative controls (scrambled hairpin virus, no virus)?
NOTE: Running a parallel transduction with no virus should yield 100% cytotoxicity upon puromycin addition. Scrambled hairpin virus (sc-108080) transduction is useful to determine if any other aspect of the transduction process influences knockdown, including the presence of a non gene specific hairpin (nonspecific antisense).
Transient shRNA Transfection
Instead of chemically synthesizing the siRNAs before introducing it in the cell, the siRNAs are made directly by the cells through an expression vector that is transiently transfected into a dividng cell. The shRNA transfer vector alone can be transiently introduced into the dividing cell where the shRNA is synthesized by cellular machinery. While transient transfection is advantageous for fast analysis of shRNA mediated effects, stable transfection ensures long-term, reproducible as well as defined shRNA effects.
Stable shRNA Transfection
For many disease models, the most desirable cell types such as immune system or primary cells are not amenable to transfection. Viral delivery of RNAi vectors is a powerful alternative to transfection for these cell types as well as for in vivo applications. Stable expression is achieved by integration of the gene of interest into the target cell's chromosome: Initially the shRNA of interest has to be introduced into the cell, subsequently into the nucleus, and finally it has to be integrated into chromosomal DNA.
Stable expression can be influenced by two factors: The transfection method used and the vector containing the shRNA of interest. The transfection method determines which cell type can be targeted for stable integration through antibiotic selection. While many lipofection reagents transfect DNA up to a certain amount into adherent cell lines, efficient delivery of DNA into difficult-to-transfect suspension cell lines or even primary cells is only possible with viral methods and nucleofection. Nucleofection is a non-viral method of introducing DNA molecules efficiently into the nucleus of dividing cells, therefore significantly increasing the chances of chromosomal integration of the transgene. The technology was pioneered by Amaxa
Although there is still some debate as to the effectiveness of this approach, a regular shRNA transfer vector may be able to integrate into the genome of the target cell by antibiotic selection alone. The process may occur randomly by the cell's machinery itself, possibly via DNA repair and recombination enzymes. If this phenomenon does occur, integration into inactive heterochromatin may result in little or no shRNA expression, whereas integration into active euchromatin may allow for shRNA expression. However, random integration could also lead to silencing of the shRNA cassette. Several strategies have been developed to overcome the negative position effects of random integration: Site-specific, homologous and transposon-mediated integration strategies are used but require the expression of integration enzymes or additional sequences on the plasmid.
Lentiviral particles are highly efficient at infection and stable integration of the shRNA into a cell system. To obtain the lentiviral particle, the transfer vector that contains the shRNA cassette is already flanked by LTRs and the Psi-sequence of HIV. The LTRs are necessary to integrate the shRNA cassette into the genome of the target cell, just as the LTRs in HIV integrate the dsDNA copy of the virus into its host chromosome. The Psi-sequence acts as a signal sequence and is necessary for packaging RNA with the shRNA into pseudovirus particles. Viral proteins which make virus shells are provided in the packaging cell line (HEK 293T), but are not in context of the LTRs and Psi-sequences and so are not packaged into virions. Thus, virus particles are produced that are replication deficient. Lentiviral particles can infect both dividing and nondividing cells because their preintegration complex (virus “shell”) can get through the intact membrane of the nucleus of the target cell.
- Lentiviral systems efficiently transduce both dividing and non-dividing cells
- Study long-term gene knockdown with stable expression
- Reproducibly transduce cell populations
- Inducible or constitutive gene knockdown
shRNA Transfer Vector Transfection Reagents
Transient gene silencing using RNAi is critically dependent on highly efficient delivery of the shRNA transfer vector or siRNAs into cells. The two conventional reagent types are Cationic lipid-based and Polymeric formulations. All commercial transfection reagents are proprietary formulations that are competing for market share by claiming certain advantages (ie, broad cell type compatibility, low cytotoxicity, high efficiency).
Cationic lipid transfection reagents are suitable for transfecting into a wide variety of dividing cell cultures. Commercial examples include: Lipofectamine / L2000, Dharmafect, iFect, and TransIT TKO. Cationic lipids work by forming lipsomal vesicles that house the siRNA payload and bleb their way through the living cell membrane and into the cytoplasm. The efficiency of this process must be determined in order to have confidence in the knockdown effects. There are numerous commercial sources for transfection reagents for good reason; there are numerous cell types and lipsome structure will influence transfection efficiency in the multitude of experimental cell types that exist.
Polymeric formulations have been developed and optimized for transfection of shRNA plasmid DNA into the nucleus of cultured eukaryotic cells by vendors such as Open Biosystems. Cationic lipids but not polyethylenimine or polylysine prevent transgene expression when complexes are injected in the nucleus (Pollard et al 1998). Polymers but not cationic lipids promote gene delivery from the cytoplasm to the nucleus and transgene expression in the nucleus is prevented by complexation with cationic lipids but not with cationic polymers.
shRNA Transfer Vector Transient Transfection Procedure
- In a six well tissue culture plate, grow cells to a 50-70% confluency in antibiotic-free normal growth medium supplemented with FBS.
NOTE: This protocol is recommended for a well from a 6 well tissue culture plate. Adjust cell and reagent amounts proportionately for wells or dishes of different sizes.
NOTE: Healthy and subconfluent cells are required for successful transfection experiments. It is recommended to ensure cell viability one day prior to transfection.
Prepare the following solutions:
NOTE: The optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio should be determined experimentally beginning with 1 μg of shRNA Plasmid DNA and between 1.0 and 6.0 μl of shRNA Plasmid Transfection Reagent as outlined below. Once the optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio has been identified for a given cell type, the appropriate amount of shRNA Plasmid DNA/shRNA Plasmid Transfection Reagent complex used per well should be tested to determine which amount provides the highest level of transfection efficiency. For example, if the optimal shRNA Plasmid DNA:shRNA Plasmid Transfection Reagent ratio is 1 μg:1 μl, then amounts ranging from 0.5 μg/0.5 μl to 2.0 μg/2.0 μl should be tested.
Solution A: For each transfection, dilute 10 μl of resuspended shRNA Plasmid DNA (i.e. 1 μg shRNA Plasmid DNA) into 90 μl shRNA Plasmid Transfection Medium (serum antibiotic free medium).
Solution B: For each transfection, dilute 1 - 6 μl of shRNA Plasmid Transfection Reagent with enough shRNA Plasmid Transfection Medium to bring final volume to 100 μl.
NOTE: Do not add antibiotics to the shRNA Plasmid Transfection Medium.
NOTE: Optimal results may be achieved by using siliconized microcentrifuge tubes.
NOTE: Although highly efficient in a variety of cell lines, not all shRNA Plasmid Transfection Reagents may be suitable for use with all cell lines.
- Add the shRNA Plasmid DNA solution (Solution A) directly to the dilute shRNA Plasmid Transfection Reagent (Solution B) using a pipette. Mix gently by pipetting the solution up and down and incubate the mixture 15-45 minutes at room temperature.
- Wash the cells twice with 2 ml of shRNA Transfection Medium. Aspirate the medium and proceed immediately to the next step. NOTE: Do not use PBS as the residual phosphate may compete with DNA and bind the shRNA Plasmid Transfection Reagent, thereby reducing the transfection efficiency.
NOTE: Do not use PBS as the residual phosphate may compete with DNA and bind the shRNA Plasmid Transfection Reagent, thereby reducing the transfection efficiency. For each transfection, add 0.8 ml shRNA Plasmid Transfection Medium to well.
- For each transfection, add 0.8 ml shRNA Plasmid Transfection Medium to well.
- Add the 200 μl shRNA Plasmid DNA/shRNA Plasmid Transfection Reagent Complex (Solution A + Solution B) dropwise to well, covering the entire layer.
- Gently mix by swirling the plate to ensure that the entire cell layer is immersed in solution.
- Incubate the cells 5-7 hours at 37° C in a CO2 incubator or under conditions normally used to culture the cells.
NOTE: Longer transfection times may be desirable depending on the cell line.
- Following incubation, add 1 ml of normal growth medium containing 2 times the normal serum and antibiotics concentration (2x normal growth medium).
- Incubate the cells for an additional 18-24 hours under conditions normally used to culture the cells.
Aspirate the medium and replace with fresh 1x normal growth medium.
- Assay the cells using the appropriate protocol 24-72 hours after the addition of fresh medium in the step above.
NOTE: Controls should always be included in shRNA experiments. Control shRNAs are available as 20 μg. Each encode a scrambled shRNA sequence that will not lead to the specific degradation of any known cellular mRNA.
NOTE: For Western blot analysis prepare cell lysate as follows: Wash cells once with PBS. Lyse cells in 300 μl 1x Electrophoresis Sample Buffer (sc-24945) by gently rocking the 6 well plate or by pipetting up and down. Sonicate the lysate on ice if necessary.
NOTE: For RT-PCR analysis isolate RNA using the method described by P. Chomczynski and N. Sacchi (1987. Single-step method of RNA isolation by acid guanidinium thiocyanate-phenol-chloroform extraction. Anal. Biochem. 162: 156-159) or a commercially available RNA isolation kit.
Abbreviated Transduction Protocol
- Day 1:
Plate continuous (immortal/transformed) cells (1.5x10^5) in 6 well dishes in 3mL of normal growth media.
- Day 2:
Rinse cells, and add back 1mL RPMI/10%heat inactivated FCS/ penn/strep.
Add 1uL of 1000x polybrene (Millipore).
Add 30uL of virus (MOI=1; 5e6 IFU/ml * 30 uL = 150,000 particles).
- Day 3
Rinse off virus and replace with normal growth cell media.
- Day 4
Add selection (1ug/mL Puromycin), or split cells as needed into flasks containing selection.
After two weeks, in which non-infected cells die off in selection media (control wells that were not treated with virus)
Plate cells for RNA isolation and PCR for target gene.
Complete Transduction Protocol
Prepare mammalian cells growing exponentially and are no more than 70-80% confluent before transduction. Prepare a stock solution of hexadimethrine bromide at 2 mg/ml in water.
- Add 2.0e4 (20,000) cells in fresh medium to the number of wells needed for each construct in a 96-well plate. Duplicate or triplicate wells for each lentiviral construct and control should be used.
- Incubate 18-20 hours at 37°C in a humidified incubator in an atmosphere of 5-7% CO2.
Note: The growth rates of cells vary greatly. Adjust the number of cells plated to accommodate a confluency of 70% upon transduction. Also account for the length of time the cells will be growing before downstream analysis when determining the plating density.
Remove medium from wells. To each well add 110 µl medium and hexadimethrine bromide (aka polybrene) to a final concentration of 8 µg/ml. Gently swirl the plate to mix.
Polybrene; 1,5-dimethyl-1,5-diazaundecamethylene polymethobromide, hexadimethrine bromide.
Polybrene (hexadimethrine bromide) is a cationic polymer used to increase the efficiency of infection of certain cells with a retrovirus in cell culture. Polybrene acts by neutralizing the charge repulsion between virions and sialic acid on the cell surface.
Hexadimethrine bromide is a small positive charged molecule that binds to cell surfaces and neutralizes surface charge. This treatment enhances transduction of most cell types by 2-10 fold. Some cells, like primary neurons, are sensitive to hexadimethrine bromide. Do not add hexadimethrine bromide to these types of cells. If working with a cell type for the first time, a hexadimethrine control only well should be used to determine cell sensitivity.
Add lentiviral particles to appropriate wells. Gently swirl the plate to mix. Incubate 18-20 hours at 37°C in a humidified incubator in an atmosphere of 5-7% CO2. Cells may be incubated for as little as 4 hours before changing the medium containing lentiviral particles. Overnight incubation may be avoided when toxicity of the lentiviral particles are a concern.
Note: When transducing a lentiviral construct into a cell line for the first time, a range of volume or MOI should be tested.
Remove the medium containing lentiviral particles from wells. Add fresh medium to a volume of 120 µl to each well. Note: For cell types that do not strongly adhere to the plate, 100 µl of medium may be removed and replaced with 100 µl fresh medium.
Day 4 and forward.
Replace medium every 3-4 days until cells are to be assayed. Cells may be selected and each clone may be expanded to assay for expression of shRNA. A variety of phenotypic, enzymatic, or gene expression assays may be performed. The desired assay should be optimized prior to the high-content screen with both negative and positive controls.
Note: Due to the random integration of the lentivirus into the host genome, varying levels of shRNA expression may be seen with different colonies. Testing a number of colonies will allow the optimal degree of expression to be determined.
- Untreated Cells. Untreated cells will provide a reference point for comparing all other samples.
- Empty construct, containing no shRNA insert; The empty viral particles or DNA are a useful negative control that will not activate the RNAi pathway because it does not contain an shRNA insert. It will allow for observation of cellular effects of the transduction/transfection process. Cells transduced/transfected with the empty control provide a useful reference point for comparing specific knockdown.
- Non-targeting shRNA; This non-targeting shRNA is a useful negative control that will activate RISC and the RNAi pathway, but does not target any human or mouse genes. The short hairpin sequence cotnains 5 base pair mismatches to any known human or mouse gene. This allows for examination of the effects of shRNA transduction/transfection on gene expression. Cells transduced/transfected with the non-target shRNA will also provide useful reference for interpretation of knockdown.
- Positive shRNA knockdown control; This control contains shRNA sequence that targets GFP expression. This shRNA control has been experimentally shown to reduce GFP expression. This control serves to quickly visualize knockdown in cells expressing GFP.
- Positive shRNA knockdown control; This control contains shRNA sequence that targets eGFP expression (GenBank Accession # pEGFP U476561). The shRNA has been experimentally shown to reduce eGFP expression by 90% in C166-GFP mouse fibroblast cells 48 hours post-transduction by mRNA transcript level. This control serves to quickly visualize knockdown in cells expressing eGFP.
- Positive reporter vector or lentiviral particles; This is a useful positive control for measuring transduction/transfection efficiency and optimizing shRNA delivery. The GFP Control contains a gene encoding GFP, driven by the CMV promoter. This control provides fast visual confirmation of successful transduction/transfection.
The copGFP protein is a novel natural green monomeric green fluorescent protein cloned from copepod Pontellina plumata, a type of plankton. The copGFP protein is a non-toxic, non-aggregating protein with fast protein maturation, high stability at a wide range of pH (pH 4-12), and fluorescent properties that do not require any additional cofactors or substrates.
Due to its exceptional properties, copGFP is an excellent fluorescent marker that can be used instead of EGFP (the widely used Aequrea victoria GFP mutant) for monitoring delivery of lentiviral constructs into cells. The copGFP protein has a very bright fluorescence that exceeds the brightness of EGFP by approximately a third.
The copGFP protein emits green fluorescence with the following characteristics:
- emmision wavelength max – 502 nm
- excitation wavelength max – 482 nm
- quantum yield – 0.6
- extinction coefficient – 70,000 M-1 cm-1
When assaying cells, DO NOT fix with methanol and minimize exposure to light. PFA/Formalin fixation works.
Factors Influencing Successful Transfection
Concentration and purity of nucleic acids
Determine the concentration of your DNA using 260 nm absorbance. Avoid cytotoxic effects by using pure preparations of nucleic acids.
DNA:In terms of plasmid preparation, McManus Lab has not observed a need to use E. coli cells that are highly defective for recombination. High DNA quality usually means high transfection efficiency. All DNA preparations should be performed by Cesium prep or endotoxin-free ion exchange plasmid purification methods. If poor transfection is consistently observed, it may be worth performing a additional clean-up of the DNA. The transfection protocols described here are sensitive to the amount of DNA. It is important to optimize DNA:Transfection Reagent ratios.
Transfection in serum-free media
The highest transfection efficiencies can be obtained if the cells are exposed to the transfection complexes in serum free conditions followed by the addition of medium containing twice the amount of normal serum to the complex medium 3–5 hrs post transfection (leaving the complexes on the cells). However, the transfection medium can be replaced with normal growth medium if high toxicity is observed.
No antibiotics in transfection medium
The presence of antibiotics can adversely affect the transfection efficiency and lead to increased toxicity levels in some cell types. It is recommended that these additives be initially excluded until optimized conditions are achieved, then these components can be added, and the cells can be monitored for any changes in the transfection results.
High protein expression levels
Some proteins when expressed at high levels can by cytotoxic; this effect can also be cell line specific.
Cell history, density, and passage number
It is very important to use healthy cells that are regularly passaged and in growth phase. The highest transfection efficiencies are achieved if cells are plated the day before. However, adequate time should be allowed to allow the cells to recover from the passaging (generally >12 hours). Plate cells at a consistent density to minimize experimental variation. If transfection efficiencies are low or reduction occurs over time, thawing a new batch of cells or using cells with a lower passage number may improve the results.
- Murphy S, Altruda F, Ullu E, Tripodi M, Silengo L, and Melli M. DNA sequences complementary to human 7 SK RNA show structural similarities to the short mobile elements of the mammalian genome. J Mol Biol. 1984 Aug 25;177(4):575-90.
- Czauderna F, Santel A, Hinz M, Fechtner M, Durieux B, Fisch G, Leenders F, Arnold W, Giese K, Klippel A, and Kaufmann J. Inducible shRNA expression for application in a prostate cancer mouse model. Nucleic Acids Res. 2003 Nov 1;31(21):e127.
- Koper-Emde D, Herrmann L, Sandrock B, and Benecke BJ. RNA interference by small hairpin RNAs synthesised under control of the human 7S K RNA promoter. Biol Chem. 2004 Sep;385(9):791-4. DOI:10.1515/BC.2004.103 |
- Whither RNAi?. Nat Cell Biol. 2003 Jun;5(6):489-90. DOI:10.1038/ncb0603-490 |
- Pollard H, Remy JS, Loussouarn G, Demolombe S, Behr JP, and Escande D. Polyethylenimine but not cationic lipids promotes transgene delivery to the nucleus in mammalian cells. J Biol Chem. 1998 Mar 27;273(13):7507-11.
Bold text Italic text