Design a Microfluidic Chip

From OpenWetWare
Revision as of 18:56, 28 October 2010 by Cory J. Geesaman (talk | contribs)
Jump to: navigation, search

The process of designing a microfluidic chip to be ordered from the Caltech Foundry is not hard but it is a little involved.


  1. Learn the design rules
  2. Make a rough outline of your chip design
    • This should be influenced by previous designs as well as constraints of the design rules
  3. gain a (rudimentary) understanding of AutoCAD
  4. Create a schematic of your chip in autoCAD

Design Rules for Microfluidics