Choosing reference genes for qPCR normalisation: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
Quantifying mRNA via cDNA levels as in a [[QRT-PCR]] hinges on the references you choose. If you pick only one reference gene and your pick is not constant across different conditions or samples, your results will be skewed. Pick several and check whether they satisfy the criteria for a good reference gene.
'''Which reference genes should be used for a qPCR experiment?''' Quantifying mRNA via cDNA levels as in a [[QRT-PCR]] hinges on the references you choose. If you pick only one reference gene and your pick is not constant across different conditions or samples, your results will be skewed. Pick several and check whether they satisfy the criteria for a good reference gene.


== Normalisation methods ==
There is an ongoing debate what is the best way to normalise qPCR data. Reference genes are the most common method, although single unverified reference genes invalidate the qPCR data generated. Total RNA, ribosomal RNA, and genomic DNA have been suggested as alternative methods.


=== Reference genes ===
Most common method. Best practise is a panel, e.g. [http://www.bioline.com/h_prod_detail.asp?user_prodname=Human%20Endogenous%20Control%20Gene%20Panel] not just a single reference gene and including data on suitability as reference genes. Often ''housekeeping gene''  is used here instead of reference gene but the term is poorly defined and can be misleading.


=== RNA ===
== Normalisation with reference genes ==
Total rRNA [http://scholar.google.com/scholar?hl=en&lr=&safe=off&cluster=12435126891737656303] [http://scholar.google.com/scholar?hl=en&lr=&safe=off&cluster=9547016096229453970], or total RNA. Drawback: rapidly dividing cells will have more rRNA and different rRNA/mRNA ratio which will complicate comparison; difference in cDNA synthesis not taken into account.
 
=== Genomic DNA ===
Genomic DNA or cell number. Drawbacks: RNA degrades faster than RNA which can distort the data; sample cannot be DNase treated; efficiency of cDNA synthesis not taken into account.
 
== The ideal reference gene ==


=== The ideal reference gene ===
A mRNA used as reference or standard of a [[QRT-PCR]] (and other experiments) should have the following properties:
A mRNA used as reference or standard of a [[QRT-PCR]] (and other experiments) should have the following properties:
* expressed in all cells
* expressed in all cells
Line 20: Line 11:
* medium copy number for more accuracy (or similar copy number to gene of interest)
* medium copy number for more accuracy (or similar copy number to gene of interest)


== Common reference genes ==
=== Common reference genes ===
 
Common reference mRNAs linked to known mouse primer pairs:
Common reference mRNAs linked to known mouse primer pairs:
* ribosomal proteins (e.g. RPLP0)
* ribosomal proteins (e.g. RPLP0)
Line 35: Line 25:
* HPRT1 hypoxanthine-guanine phosphoribosyltransferase
* HPRT1 hypoxanthine-guanine phosphoribosyltransferase


Common but not recommended references
===Common but problematic references===
* glyceraldehyde-3-phosphate dehydrogenase GAPDH (common metabolic enzyme) [http://medgen.ugent.be/rtprimerdb/search_results.php?primer=&application=-1&detection=-1&locuslink=&snp=&last_name=&order=0&search=Search+Primers&first_result=0&pubmed=&string_type=substring&gene=gapdh&organism=2&Search=Search&id=], [http://www.realtimeprimers.org/SYBR%20Green/Mouse%20SYBR%20Green.html] - see [[QRT-PCR#Reference_mRNAs]]
* glyceraldehyde-3-phosphate dehydrogenase GAPDH (common metabolic enzyme) [http://medgen.ugent.be/rtprimerdb/search_results.php?primer=&application=-1&detection=-1&locuslink=&snp=&last_name=&order=0&search=Search+Primers&first_result=0&pubmed=&string_type=substring&gene=gapdh&organism=2&Search=Search&id=], [http://www.realtimeprimers.org/SYBR%20Green/Mouse%20SYBR%20Green.html] - see [[QRT-PCR#Reference_mRNAs]]
* ribosomal RNAs (28S or 18S) - see below
 
* ribosomal RNAs (28S or 18S)
:'''[[User:Ajeffs|Ajeffs]] 06:55, 21 April 2007 (EDT):''' 18S is generally a terrible choice for a reference gene thanks to the combination of (i) high abundance (creating a 1:100 dilution of template to run in parallel with neat template just for 18S is a complete drag); and (ii) having different degradation characteristics to mRNAs (it appears to be more resistant to degradation). However, if you can show that you have screened 5-10 reference genes, and 18S is still the best for your specific situation then so be it (but do try 28S if you or you PI is hung-up on 18S).


== Reference genes across tissues ==
== Reference genes across tissues ==
Line 59: Line 51:


== Selection ==
== Selection ==
*'''[[User:Ajeffs|Ajeffs]] 06:55, 21 April 2007 (EDT):''' Screen a handful of ref genes, select the most stable using genorm, bestkeeper etc, use at least 2 reference genes for subsequent reactions and normalisation. Inlcude your genorm M values when publishing qPCR data.
*'''[[User:Ajeffs|Ajeffs]] 06:55, 21 April 2007 (EDT):''' Screen a handful of ref genes, select the most stable using genorm, bestkeeper etc, use at least 2 reference genes for subsequent reactions and normalisation. Inlcude your genorm M values when publishing qPCR data.
 
== Use of 18S ==
*'''[[User:Ajeffs|Ajeffs]] 06:55, 21 April 2007 (EDT):''' 18S is generally a terrible choice for a reference gene thanks to the combination of (i) high abundance (creating a 1:100 dilution of template to run in parallel with neat template just for 18S is a complete drag); and (ii) having different degradation characteristics to mRNAs (it appears to be more resistant to degradation). However, if you can show that you have screened 5-10 reference genes, and 18S is still the best for your specific situation then so be it (but do try 28S if you or you PI is hung-up on 18S).

Revision as of 03:04, 8 February 2008

Which reference genes should be used for a qPCR experiment? Quantifying mRNA via cDNA levels as in a QRT-PCR hinges on the references you choose. If you pick only one reference gene and your pick is not constant across different conditions or samples, your results will be skewed. Pick several and check whether they satisfy the criteria for a good reference gene.


Normalisation with reference genes

The ideal reference gene

A mRNA used as reference or standard of a QRT-PCR (and other experiments) should have the following properties:

  • expressed in all cells
  • constant copy number in all cells
  • medium copy number for more accuracy (or similar copy number to gene of interest)

Common reference genes

Common reference mRNAs linked to known mouse primer pairs:

  • ribosomal proteins (e.g. RPLP0)
  • PPIA peptidylprolyl isomerase A = cyclophilin A
  • MHC I (major histocompatibility complex I)
  • TUBB β-tubulin (common cytoskeletal enzyme)
  • ACTB β-actin (common cytoskeletal enzyme) [1], [2]
  • YMHAZ tyrosine 3/tryptophan 5 -monooxygenase activation protein, zeta polypeptide
  • B2M β2-microglobulin
  • UBC ubiquitin C
  • TBP TATAA-box binding protein
  • GUSB β-glucuronidase
  • HPRT1 hypoxanthine-guanine phosphoribosyltransferase

Common but problematic references

  • ribosomal RNAs (28S or 18S)
Ajeffs 06:55, 21 April 2007 (EDT): 18S is generally a terrible choice for a reference gene thanks to the combination of (i) high abundance (creating a 1:100 dilution of template to run in parallel with neat template just for 18S is a complete drag); and (ii) having different degradation characteristics to mRNAs (it appears to be more resistant to degradation). However, if you can show that you have screened 5-10 reference genes, and 18S is still the best for your specific situation then so be it (but do try 28S if you or you PI is hung-up on 18S).

Reference genes across tissues

If you are comparing mRNA/cDNA levels from different tissue it is especially important that reference gene levels are close to constant across different tissues. Radonić et al compared 13 putative reference gene levels in 13 different human tissues [PMID 14706621]. The results are summarised below:

  • genes with the smallest range (most constant levels): TBP, RP2, Act, Tub, PLA
  • genes with the largest range (unsuitable for cross-tissue comparison): HPRT, Alb, PBGD, GAPDH, β2M
  • genes undetectable in tissue: Alb - colon; PPIA - ovaries; HPRT - prostate, testis, ovary, small intestine, colon; PBL, skeletal muscle; Tub - ovaries, PBGD - skeletal muscle; TBP - lung, prostate, colon; G6PDH - colon
  • genes detected in all tissues: GAPDH, Act, β2M, L13, PLA, RP2

(note the source Fig 2 is sometimes impossible to read and the describing text is incomplete; that might have lead to some errors above)

Primer collections

Search primer repositories like RTPrimerDB (see also below) and check the literature before doing it from scratch.
Check out the Eccles Lab collection of human and mouse qPCR reference genes on OWW.

Stability

  • Ajeffs 06:55, 21 April 2007 (EDT): In addition to the given requirements of good (well, acceptable) specificity and efficiency of the reference gene primers, the next most important aspect of reference gene selection is stability. I don't care if the CT value of my reference genes (yes, genes, not gene) is close to the target genes/s or not - as long as the efficiency of all the primers is similar, and they are all working within their respective limits of detection i.e. linear range, then the stability of the reference genes between samples, treatments, etc. is the most crucial aspect of generating believable qPCR results.

Selection

  • Ajeffs 06:55, 21 April 2007 (EDT): Screen a handful of ref genes, select the most stable using genorm, bestkeeper etc, use at least 2 reference genes for subsequent reactions and normalisation. Inlcude your genorm M values when publishing qPCR data.
Retrieved from "https://openwetware.org/mediawiki/index.php?title=Choosing_reference_genes_for_qPCR_normalisation&oldid=185230"