Difference between revisions of "CH391L/S12/Origins of Replication"

From OpenWetWare
(Strand displacement replication)
(Iteron regulation)
Line 72: Line 72:
F, RK6, P1, RK2, and RP4 also use iterons.
F, RK6, P1, RK2, and RP4 also use iterons.
pETcoco is an interesting plasmid, made by Novagen.  It can be maintained as a single copy plasmid using the origin from the F plasmid (oriS and RepE).  It can be induced to increase copy number to 40.  The switch is achieved by the induction of the trfA protein, which regulates the RK2 origin (oriV).
==Othere extra-chromosomal bodies==
==Othere extra-chromosomal bodies==

Revision as of 09:24, 4 March 2012

Plasmid Replication

In order for a piece of circular, dsDNA to be propagated in bacteria, it needs to be replicated by host machinery. There is a sequence in the plasmid that directs the cell to begin replication. Important considerations are host range, compatibly, and copy number. The host range refers to what species of bacteria will recognize the origin of replication and thus allow for replication. The compatibility refers to a plasmid's ability to coexist with another plasmid in the same cell. Copy number refers to the average or expected number of copies of the plasmid per cell.

There are three main mechanisms for plasmid replication: Rolling Circle, Strand Displacement, and Theta.

Strand displacement replication

RepC binds repeat sequences recruits RepA ( a helicase) to melt an AT rich region. This exposes two single stranded origins ssiA and ssiB. RepB polymerizes primers for these origins. DNA polymerization follows in each direction, meanwhile displacing the non-template stand.

Strand displacement is associated with broad host range vectors, possibly because it does not require any of the normal host machinery (DnaA, DnaB, DnaC, and DnaG)

Rolling circle replication

A nick is made by the Rep protein at the "double strand origin" of a dsDNA plasmdid. The free 3'OH is extended, displacing as it progresses. After one unit length of displacement, replication is terminated, yielding one dsDNA plasmid and ssDNA of one unit length. The displaced strand then serves as a template for replication from a "single strand origins." Since each strand is replicated independently, it is possible for the ssDNA form to accumulate.

This mechanism is found in gram-positive bacteria like Staphylococcus aureus and Streptomyces lividans as well as many bacteriophages.

Theta replication

RNA serves a primer, DNA is polymerized in one or both directions. In the first case, a single fork circumnavigates the entire plasmid until the origin is reached, and daughter plasmids separate. In bidirectional replication, two forks propagate and meet on the far side of the plasmid before resolution.

Theta is the most common form of DNA replication, including most plasmids as well as chromosomes. It is particularly associated with gram-negative bacteria. ColE1, P15A, RK2, F, and P1 all use theta replication.

Host range

Plasmids are classified as having a narrow or broad host range.

  • ColE1 and pMB1 are limited to E. coli and a few close relatives,
  • RK2 plasmids can be used in most gram-negative bacteria.
  • RSF1010 can use used in most gram-negative bacteria, and some gram-positive
  • Plasmids from gram-positive bacteria tend to function well in other gram-positive bacteria.

Compatibility groups

If two plasmids have the same (or very similar) origins of replication, they will compete with each other for replication machinery. This results in an unstable situation. If the two plasmids posses different selectable markers, this can be maintained for several generations, but eventually one of the plasmids will be lost. For scenarios in which multiple plasmids are necesary, one must be careful to choose plasmids will compatible origins. The most common dual-plasmid pair is ColE1(or pMB1) and p15A. The most common plasmid triplet is ColE1 (or pMB1),p15A, and pSC101. Tolia and Joshua-Tor suggest the following groups:

  • ColE1/pMB1 (eg pET, pUC, pBR322, pGEX, pMAL)
  • P15A (eg pBad, pACYC)
  • CloDF13
  • ColA
  • RSF1030

Copy number

An important consideration in choosing what plasmid backbone to use is the copy number. For example, cloning is best done with a high copy plasmid (e.g. pUC) as plasmid preps will have a higher yield. Expressing a toxic gene is better from a low to medium copy plasmid(e.g. pET which uses the pBR322 origin), as there are fewer copies.

  • ColE1: 15-20 copies
  • pMB1: 20-700 copies
    • pUC: 500-700 copies
    • pBR322: ~20 copies
  • pSC101: ~5 copies
  • P15A: 10-12 copies
  • RK2: 4-7 copies
  • F1: ~1 copy
  • CloDF13: 20-40 copies
  • ColA: 20-40 copies
  • RSF1030: >100 copies
  • P1: ~1 copy

Control of initiation/copy number

There are several mechanisms by which copy number is controlled. In all cases, some negative-regulating element (RNA or protein) is expressed from the plasmid. As the plasmid concentration increases, so too does the negative regulator. This provides a negative feedback, which stabilizes the copy number. Two plasmids that are regulated by each other's regulator will not be compatible.

RNA regulation

ColE1/pMB1: The origin contains regions promoting the synthesis of RNA I and RNA II. RNA II hybrizes to the DNA, yielded a DNA/RNA hybrid which can serve as a substrate for RNaseH. Digestion of RNA II by RNaseH yields the primer for replication. RNA I binds and sequesters RNA II, so it is unavailable for RNAse H digestion. As the copy number increases, so does the concentration of RNA I. This provides a negative feedback for replication, and sets the average number of plasmids per cell.

Additionally, The Rop protein helps lower the copy number, by stabilizing the RNA I/ RNA II duplex. Deletion of Rop, as well as a point mutation that weakens the RNA I and RNA II duplex, accounts for the higher copy of pUC (a pMB1 derivatives)

P15A, ColA, RSF1030, and CloDF13 are similar, but with versions of RNA I and RNA II that sufficiently different to allow for compatibility.

RNA and protein regulation

R1: OriR is bound by RepA, thus promoting replication. RepA can be expressed from two different promoter. A proximal promoter (pRepA) drives only RepA while a distal promoter (pCopB) drives both CopB and RepA. CopB represses pRepA, thus once there are enough plasmids around, CopB levels become high enough to limit RepA expression to pCopB promoter. plasmid encoded CopA is completmentary, and thus binds to the 5' end of the transcript originating from the pCopB promoter. The dsRNA is a substrate for the processice RNase III.

Iteron regulation

Like the above examples, pSC101's replication is positively regulated by RepA. The origin contains several (3-7) repeats of a 17-22bp sequence called iteron sequences. The pSC101 plasmid contains the RepA gene and 3 iterons. RepA binds the iterons and activates replication.

Copy number is regulated in two forms. Firstly, RepA negatively regulates its own transcription, thus the RepA protein levels (and its ability to promote replication) is confined to narrow limits. Secondly, the multimerization of RepA proteins bound to different plasmids cause the plasmids to be "handcuffed;" this is more of a problem at higher plasmid concentration, thus imposing a limit on the copy number. Adding extra iteron sequences on other plasmids can reduce the copy number by this handcuffing mechanism.

F, RK6, P1, RK2, and RP4 also use iterons.

pETcoco is an interesting plasmid, made by Novagen. It can be maintained as a single copy plasmid using the origin from the F plasmid (oriS and RepE). It can be induced to increase copy number to 40. The switch is achieved by the induction of the trfA protein, which regulates the RK2 origin (oriV).

Othere extra-chromosomal bodies





  1. Solar1998 pmid=9618448


  1. Lin-Chao1992 pmid=1283002

//Regarding the copy number of pUC vs pBR322

  1. (Genes and Genetic Elements)
  2. Tolia2006 pmid=16369554

//regarding plasmid compatibility.

  1. Seizer1983 pmid=6186390

//regarding the differences between RNA I and RNA II sequences in P15A, ColE1, RSF1030, CloDF13, and pBR322.