Sunday, November 19, 2017
Verification of Overall Mechanisms in Solution
Verification of Random Walking Mechanism on Origami
Figure 1. The irreversible binding between walker (W) and walker goal (WG). A ROX fluorophore (red star) was attached to the 5' end of each probe for walker goal (PWG) and a quencher (black cross) was attached to the 3' end of each walker. TR1, track 1. PTR1, probe for track 1. Curved regions shown on the probes were inserted into the origami.
Fluorescent spectroscopy (SPEX) was used to verify random walk on the origami. We designed a strand named walker goal (WG) which can bind to walkers irreversibly due to its perfect complementarity with walkers. A ROX fluorophore was attached to the 5' end of the probe for the walker goal (PWG) and the corresponding quencher was attached to the 3' end of the walker (Figure 1). When the walker binds to the walker goal, its quencher is directly above the fluorophore of the walker goal, hence quenching it. Thus we can setup experiments where the fluorescent level slowly decreases as more and more walkers reach the walker goal. The overall origami layout was shown in Figure 2.
To verify that the walker walks on the origami using the intended mechanisms, we need a control where there are no tracks, except for the one that the walker is bound to, to see if the walker can simply dissociate off its track and bind to the walker goal, and another control where no walker trigger is released to see if the walker will start moving without the walker trigger. SEPX Results show that there is no decrease in fluorescence in the absence of tracks or walker trigger, but there is a decrease in fluorescence when both tracks and walker trigger are present.
Three different starting positions (SP10, 22 and 34) were chosen (Figure 3, A-C), named after the index of each particular position on the origami. Since it is possible for the walkers to undergo space walking (SW), namely dissociating from the origami, binding to free floating tracks in the solution and rebinding to origami, we added a control group in which only one track at the starting position 10 was planted on the origami (Figure 3, D). Excess of walker triggers were added in the beginning of the experiment to activate the walkers and excess of walkers with quenchers attached were added in the end to stop the reactions.SEPX Results show that fluorescent signals decreased faster when the walkers were planted nearer to goals.
Figure 2. The overall origami layout used in SPEX experiments. Each type of track is indexed with a unique number.
Figure 3. Figure 9. Origami layouts in SPEX experiments. Cyan, markers used to check origami orientation under AFM. Blue, Track 1. Red, Track 2. White, DNA staples only. Five-pointed star, walker goal. Rectangles indicate the starting position for random walk.