Difference between revisions of "BME103:T930 Group 10"
(→Initial Machine Testing)
|Line 26:||Line 26:|
'''The Original Design'''<br>
'''The Original Design'''<br>
[[Image:BME103_Group10_Assembly.png|300px|3D CAD image of Open PCR Machine]]<br>
[[Image:BME103_Group10_Assembly.png|300px|3D CAD image of Open PCR Machine]]
Revision as of 17:08, 13 November 2012
|BME 103 Fall 2012|| Home |
Lab Write-Up 1
Lab Write-Up 2
Lab Write-Up 3
Course Logistics For Instructors
Wiki Editing Help
LAB 1 WRITE-UP
Initial Machine Testing
A PCR machine is a device that replicates DNA segments by performing polymerase chain reactions. This is useful for purposes such as ours of cancer marker detection. Our PCR machine is a relatively simple and inexpensive machine that is portable and inexpensive. It can hold 16 DNA samples and is compatible with most computers and operating systems. As indicated by the cross section, our PCR machine is composed of few components and is designed for ease of use.
When we unplug the circuit board from the mounting plate, the LED display on the PCR machine stopped functioning.
When we unplugged the white wire that connects the Open PCR circuit board to the heating plate, the temperature recordings that were displayed on the LED display stopped functioning.
We first tested our PCR machine on October 23, 2012. Before testing, we attempted to take the PCR machine apart to gain a better understanding of how it works. Following the instructions, we examined individual components of the machine and unplugged special components to examine the effect. After unplugging the wire that connects the circuit board to the LED display, we were unable to plug the wire back in as some of the prongs to the metal adapter had bent. Thus, upon our initial test, we were able to test the machine and observe its changes through the computer display but we could not compare the changes to the LED Display on the PCR machine.
Polymerase Chain Reaction
Polymerase Chain Reaction (PCR) is a technique used to amplify fragments of DNA. This allows researchers to see the base sequence of the DNA. It works by the DNA polymerase enzyme synthesizes a complementary strand of the fragmented DNA when mixed with primers that signal where the DNA sequencing should begin. When the DNA polymerase enzyme, MgCL2, dNTP’s, forward primer, and reverse primers are all added to the test tubes and placed in the PCR machine, the mixture is first heated to separate the double helix, then cooled to allow the primers to bind. After the primers bind, the polymerase completes the new complementary strands. The PCR machine then repeats heating and cooling cycles to multiply the fragmented DNA. After a couple hours, the now amplified segments of DNA can be analyzed to test for a cancer marker.
The PCR (GoTaq) Master Mix is advertised as a “ready-to-use solution” and it contains the Taq DNA polymerase, dNTPs, MgCl2 and reaction buffers. These substances are mixed at proper concentrations so the user can achieve a useable amplification of DNA segments by PCR.
Test tube 2-
Test tube 3-
Test tube 4-
Test tube 5-
Test tube 6-
Test tube 7-
Test tube 8-
Fluorimeter set up Procedure:
Image J Procedure:
Research and Development
Specific Cancer Marker Detection - The Underlying Technology
The DNA sequence r17879961 is the cancer-associated sequence for Colon Rectal Cancer. The goal of this experiment was to detect a cancer-associated sequence in a PCR machine and through the detection method. PCR stands for polymerase chain reaction, a method that uses DNA polymerase and primers, small sets of DNA, to amplify a sample of DNA to study and see specific sequences in it. Through thermal cycling, DNA sequences are melted apart from their complimentary base pairs and then cooled to allow primers to connect to the open DNA sequences. This process is repeated again and again to get many copies of the specific DNA strand. In this experiment, the reverse primers used will be in the sequence of AAACTCTTACACTGCATACA and that will accompany to the TTTGAGAATGTGACGTATGT which is the sequence of Colon rectal cancer that is being studied. This occurs on the 22nd chromosome and the missense of the disease comes when the sequence AATGT has the T in the middle is changed to a C which is cancer associated and creates a Protein Change to occur. In this experiment, this sequence will be put in with the reverse primer sequence listed above. Through the PCR process, the primer will attach to the sequence and replicate the DNA sequence. If the cancer sequence is present, the primers will attach and replicate until there are numerous samples of the cancer sequence. If there is no cancer sequence present, the primers will not bond since the sequence will be different and the ending DNA sequence will be the same as the original sequence put in. This will provide a correct detection for the r17879961 SNP.
(BONUS points: Use a program like Powerpoint, Word, Illustrator, Microsoft Paint, etc. to illustrate how primers bind to the cancer DNA template, and how Taq polymerases amplify the DNA. Screen-captures from the OpenPCR tutorial might be useful. Be sure to credit the source if you borrow images.)