Difference between revisions of "BME100 f2013:W900 Group10 L5"

From OpenWetWare
Jump to: navigation, search
(Data Analysis)
(Data Analysis)
Line 167: Line 167:
[[Image: BME100_Group_10_dsDNA_pre-correction.png]]
[[Image: BME100_Group_10_dsDNA_pre-correction.png]]
[[Image: BME100_Group_10_dsDNA_post-correction.png]]
<!-- Note: Be sure to delete the text in brackets: ''[ ]'' -->
<!-- Note: Be sure to delete the text in brackets: ''[ ]'' -->

Revision as of 14:34, 10 November 2013

Owwnotebook icon.png BME 100 Fall 2013 Home
Lab Write-Up 1 | Lab Write-Up 2 | Lab Write-Up 3
Lab Write-Up 4 | Lab Write-Up 5 | Lab Write-Up 6
Course Logistics For Instructors
Wiki Editing Help
BME494 Asu logo.png


Name: Joslin Jose
Name: Barrett Anderies
Name: student
Name: student
Name: student
Name: student


Background Information

SYBR Green Dye

SBYR green dye is a cyanine dye used as a nucleic acid stain. When bound to DNA it absorbs blue light and emits green light. The stain binds to double stranded DNA at very high levels and binds to single stranded DNA at much lower levels. This allows us to measure the amount of double stranded DNA while getting minimal noise on our signal from the presence of single stranded DNA. It can also stain RNA at lower levels, but this is not important for our experiment (in which we know our sample does not contain RNA). It is also the most sensitive stain available for detecting double stranded DNA during PCR.

Single-Drop Fluorimeter

This device is used to excite the stain molecules in order to generate the signal (green light) for us to capture. The single-drop fluorimeter is designed to hold a single drop of the sample and pass the wavelength (~497nm) of light required to excite the stain molecules through the sample.

[Instructions: A description of the single-drop fluorimeter device. Add a PHOTO for bonus points]

How the Fluorescence Technique Works

A droplet is placed on the hydrophobic slide which allows the droplet to hold its spherical shape. The sample droplet is then exposed to an ultraviolet light light beam to excite the stain molecules which proceed to emit green light (our signal). We capture this signal (green light) with our smartphone camera. In theory, the amount of signal captured by our camera should be proportional to the concentration of DNA in the sample (the pictures must be filtered so that only the amount of green light captured is taken into consideration). Therefore, once we have calibrated our camera with known concentrations of DNA we should be able to compare signal strengths (green light emittance) from unknown DNA concentration samples with our calibration data to accurately estimate the DNA concentration in that sample.

[Instructions: In your own words]


Smart Phone Camera Settings

  • Type of Smartphone: Samsung Galaxy SIII
    • Flash: OFF
    • ISO setting: 800
    • White Balance: Auto
    • Exposure: +2 (maximum)
    • Saturation: Auto (no manual options)
    • Contrast: Auto (no manual options)


[Instructions: Describe how to set up your camera in front of the fluorimeter. Add a PHOTO of this set-up for bonus points.]

The camera was placed upright in the supplied stand. The camera lens was positioned 6cm from the droplet in order to get the closest view possible while still being within the focus range of the camera. The height of the fluorimeter was adjusted so that the lens of the camera was at the same height as the droplet to ensure a full side view.

  • Distance between the smart phone camera lens and drop = 6cm

Solutions Used for Calibration

Calf Thymus DNA Solution Concentration (µg/mL) Volume of the 2X DNA Solution (µL) Volume of the SYBR Green I Dye Solution (µL) Final DNA Concentration in SYBR Green I Assay (ng/mL)
5 80 80 2.5
2 80 80 1
1 80 80 0.5
0.5 80 80 0.25
0.25 80 80 0.125
0 80 80 blank

Placing Samples onto the Fluorimeter

  1. Place a clean slide with the hydrophobic side up into the slot in the Fluorimeter.
  2. Turn on the Fluorimeter.
  3. Use a micro-pipette to transfer 80 µL of SYBR Green I Dye and 80 µL of sample (either water or DNA solution) onto the slide to form a single droplet.
  4. Move the slide until the droplet is directly in line with the blue light beam (if not so already).
  5. Position camera at the predetermined position (see "Calibration") and set a countdown timer on the camera.
  6. Focus the camera on the droplet and start the countdown timer.
  7. Cover the entire apparatus with the supplied box to minimize external light and wait for the camera to capture the picture.
  8. Remove the box, open the recently captured picture and rename it to something that represents the sample DNA concentration and picture number.
  9. Remove the 160 µL droplet from the Fluorimeter slide with a micro-pipette and remove any remaining liquid with a paper towel.
  10. Repeat the above steps two more times to get a total of three pictures of three different droplets of the same DNA concentration.
  11. Repeat the above steps for each sample.

Data Analysis

Representative Images of Samples

The picture below shows the control case where no DNA is present in the sample

BME100 Group 10 Drop Without DNA.png

The picture below shows a test case where DNA is present in the sample

BME100 Group 10 Drop With DNA.png

Image J Values for All Samples

[Instructions: See worksheet page 8. To save time on typing a new Wiki table from scratch, use THIS TOOL to auto-generate a Wiki table: Excel-to-Wiki Converter. Copy the headers and values from the Excel spreadsheet you made, paste them into the form field, click submit, copy the Wiki code that the tool generated, and replace TABLE GOES HERE (below) with your auto-generated code.]

CT DNA Final Concentration (µg/ml) Area Mean Pixel Value RAWINTDEN Drop RAWINTDEN Background Corrected INTDEN
0 63850 9.801 625816 59414 566402
0 66618 14.951 996018 79261 916757
0 63749 8.569 546237 63420 482817
0.125 69214 8.492 587772 80722 507050
0.125 67620 21.642 1463410 93467 1369943
0.125 50109 8.395 420689 7013 413676
0.25 63624 30.175 1919850 65755 1854095
0.25 54968 31.24 1717180 58722 1658458
0.25 62254 34.8 2166468 13405 2153063
0.5 64057 76.566 4904612 69973 4834639
0.5 64966 55.922 3633024 15391 3617633
0.5 69714 54.787 3819397 13548 3805849
1 72788 89.233 6495124 62681 6432443
1 71872 89.702 6447038 72261 6374777
1 68364 87.689 5994752 14063 5980689
2.5 74024 124.657 9227622 16445 9211177
2.5 75904 130.099 9875048 84898 9790150
2.5 83280 127.561 10623306 76871 10546435

Fitting a Straight Line

BME100 Group 10 dsDNA pre-correction.png

BME100 Group 10 dsDNA post-correction.png