User:Vincent Rouilly/XYZ Table Project: Difference between revisions
From OpenWetWare
Jump to navigationJump to search
Line 1: | Line 1: | ||
==Resources== | ==Resources== | ||
* [http://www.garagefab.cc/contraptor Contraptor Project] | * Original Plotter Project: [http://www.garagefab.cc/contraptor Contraptor Project] | ||
* [http://dev.www.reprap.org/bin/view/Main/Stepper_Motor_Driver_1_2#Test_Your_Board Stepper Motor Driver Doc] | * RepRap Driver: [http://dev.www.reprap.org/bin/view/Main/Stepper_Motor_Driver_1_2#Test_Your_Board Stepper Motor Driver Doc] | ||
==Build Log== | ==Build Log== |
Latest revision as of 04:45, 23 August 2009
Resources
- Original Plotter Project: Contraptor Project
- RepRap Driver: Stepper Motor Driver Doc
Build Log
Starting Point
- Kit from garagefab.cc to build XY Plotter
- Mechanical parts:
- ...
- Electronic parts:
- 1 Arduino Diecimilia
- 2 RepRap Stepper Motor Driver v1.2
- 2 Stepper Motor
- Software:
- Arduino IDE
- GCode
- ...
- Mechanical parts:
- ATX Power Supply (240v- 250W)
- Tools
Step 1: Building X Axis
- ...
Step 2: Building Y Axis / Frame
- ...
Step 4: Setting up Motors / Transmissions
- ...
Step 5: Wiring-up and Testing the system
- Power Supply from ATX
- to use ATX as a standalone, you need to connect the green wire to any black wire on the Mother Board connector
- Testing
- Run the RepRap Driver test to check that everything is ok.
Step 6: Arduino, Softwares, and G-Code
- Arduino 0016
- Arduino Sketch to drive stepper motor (from RepRap project)
- Download RepRap Firmware (v1.3) and follow instructions
- Upload sketch onto Arduino
- Now your Arduino waits for G-Code instructions on its serial port.
- G-Code instruction handler
- Download and Install ReplicatorG from here
- G-Code generator
- You can use Cam.py to generate G-Code from images (SVG, JPG, ...)
Performance testing
- Perpendicular trajectories:
- ...
- Diagonal trajectories:
- ...
General Feedback
- Sketch-up model:
- It would be great to use a color code for the different part types in Google Sketchup.
- It would be good to have a unique label for each part to help feedback (e.g. Letter - Number,like 'D-6', Letter=part-type, Number=instance index)
- Mechanics:
- We slightly changed the motor/axis coupling on the X axis. We mounted the motor/pulley straight onto belt (see pictures).
- Sometimes it is difficult to tighten bolts that are under axis.