User:Tamanika Tinsley/Notebook/Chem 581 Biomaterials Design Lab/2015/02/27: Difference between revisions
From OpenWetWare
Line 25: | Line 25: | ||
* The adhesive strength study was first attempted using the PASCO, however the epoxy strength was out of calibration for the instrument. | * The adhesive strength study was first attempted using the PASCO, however the epoxy strength was out of calibration for the instrument. | ||
* Next we used weights and hung them at a distance of 22.2cm for 2minutes with increasing weight. However the results were inconclusive because we maxed out at a weight of 100lbs and glued T-cells did not break apart. | * Next we used weights and hung them at a distance of 22.2cm for 2minutes with increasing weight. However the results were inconclusive because we maxed out at a weight of 100lbs and glued T-cells did not break apart. | ||
[[Image: | [[Image:ase.jpg]] | ||
*Figure 1. shows the set up of the adhesive strength experiment. | *Figure 1. shows the set up of the adhesive strength experiment. | ||
Revision as of 11:51, 6 March 2015
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Feb 27-Thermal energy study Continued
Adhesive strength study
|