User:Pranav Rathi/Notebook/OT/2011/01/10/DNA tethering experiments

Atempt .1 (jan/10/2011)

I attempt tethering again today with new beads and new anti-dig.

Ant-dig

Dr. Koch and I prepared new anti-dig: 1X concentration

• PBS [1]180μl + aliquots 20μl = [MIX] = Anti-dig 200μl.

PBS was used from the glass door fridge and aliquot from super cold gray fridge. I used two different beads:

• 1 μm new beads (looks good in microscope), 20μl from the batch. 5μl (batch) +4 5μl BGB = 50μl.
• .5μm (FL) expired on 01/07/2010.5μl (batch)+45μl BGB = 50μl.

Procedure[2]

1. Flow anti-dig 10μl wait for 5 min.
2. Flow BGB 50μl wait for 2 min.
3. Flow 1.1kb (new)10μl wait for 14 min.
4. Flow BGB wait none.
5. Flow micro-spheres one in each chamber 10μl wait for 14 min.
6. Flow BGB 50μl + seal it with nail polish

Results

1μM BEAD.[3]

{{#widget:YouTube|id=OvuG6Ju77h0}} {{#widget:YouTube|id=A_CUeRuwxco}} {{#widget:YouTube|id=ehFeJ165Tis}}

Attempt .2 (jan/11/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (1.5:100).

Procedure[4]

1. Flow anti-dig 10μl wait for 5 min.
2. Flow BGB 50μl wait for 2 min.
3. Flow 1.1kb (new)10μl wait for 14 min.
4. Flow BGB wait none.
5. Flow micro-spheres one in each chamber 10μl wait for 14 min.
6. Flow BGB 50μl + seal it with nail polish

Results

Both the chambers were same no difference between 1 and 1.5 to 100 concentration. Hardly any tethers. The one found, break immediately.

Attempt .3 (jan/12/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (1.5:100).

Procedure

Same as above.

Results

There were some tethers but no stretchable.

Attempt .5 (jan/13/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (2:100).

Procedure

Same as above.

Results

Tethers but no stretching.

Attempt .5 (jan/19/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (5:100).

Procedure

Same as above.

Results

Some Tethers but no stretching.

Attempt .6 (jan/20/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (5:100).

Procedure

Same as above.

Results

Some Tethers but no stretching.

Attempt .7 (jan/24/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.1kb dna (1:100) and (5:100).

Procedure

Same as above.

Results

Some Tethers but no significant stretching. It looked like some beads had something but nothing significant.

Attempt .8 (jan/26/2011)

components

.5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.5 μl dna + 98.5 μl POP = 100μl dna. 1.1kb dna (1:100) and (1.5:100).

Procedure

Same as above.

Results

I got possible stretching but for sure no over stretching, as bead broke off every time. [5]

Attempt .9 (jan/27/2011)

components

• Made new anti-dig (after 14 days of previous one):

180μl PBS + 20μl (anti-dig) = 200μl anti-dig. .5μm bead with 1.1kb dna (ant just made), duplex.

• 5μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1.5 μl dna + 98.5 μl POP = 100μl dna. 1.1kb dna (1:100) and (1.5:100).

Procedure

Same as above.

Results

same result as the above.

Attempt .10(jan/28/2011)

components

1μm bead with 1.1kb dna (ant just made), duplex.

• 1μl .5 μm bead + 45μl BGB =50μl (1:10).
• 1 μl dna + 98.5 μl POP = 100μl dna. 1.1kb dna (1:100) and (1.5:100).

Procedure

Same as above.

Results

Tried fine tether center to work. The settings are: [6].

Attempt .11(feb/03/2011)

It looks like that i had some tethers in previous samples but could not stretch may be because of not enough stiffness with .5μm beads. So i am trying tethering with 1μm beads. Since big beads are hard to tether because of mutual repulsion with surface i am trying them with different buffer settings (different NaCl concentration). I prepared POP with:

1. 2X ===> 296.5 μl pop + 3.5 μl NaCl (4molar stock) = 300 ul POP buffer.
2. 4X ===> 288.8 μl pop + 11.25 μl NaCl (4molar stock) = 300 ul POP buffer.
3. 6X ===> 281.25 μl pop + 18.75 μl NaCl (4molar stock) = 300 ul POP buffer.
4. 10X ===> 266.25 μl pop + 33.75 μl NaCl (4molar stock) = 300 ul POP buffer.

components

1μm bead with 1.1kb dna (ant just made), duplex.

• 1μl bead with:

1. 19 μl 2X pop + 1 ul bead (washed stock)= 20μl
2. 19 μl 4X pop + 1 ul bead (washed stock)= 20μl
3. 19 μl 6X pop + 1 ul bead (washed stock)= 20μl
4. 19 μl 10X pop + 1 ul bead (washed stock)= 20μl

• 1.1kb dna with :

1. 9.9μl 2X pop + .1μl dna = 10 μl (1:100)
2. 9.9μl 4X pop + .1μl dna = 10 μl (1:100)

Procedure

NOTE: keep the x concentration same over the micro-sphere, dna and flow solution in each chamber)

1. Flow anti-dig 10μl wait for 5 min in both chambers .
2. Flow BGB 50μl wait for 2 min in both chambers .
3. Flow 1.1kb (new with 2X or same X concentration POP)one in one and (4X OR other concentration) in second chamber; 10μl wait for 14 min.
4. Flow POP 50 μl( 2X or same X concentration POP)one in one and (4X OR other concentration) in second chamber; wait none.
5. Flow micro-spheres (with 2X or same X concentration POP) one in one and (4X OR other concentration) in second chamber; 10μl wait for 14 min.
6. Flow POP 50μl (2X or same X concentration POP)one in one and (4X OR other concentration) in second chamber + seal it with nail polish

Results

The effort of bringing big beads close to the surface was successful i tried 2x and 4x. In 4x there were more stuck beads than 2x, which shows that higher concentration of salt can help in bringing beads close to the surface, BUT there were no tethers. So i will try different concentrations lets see...

Attempt .12(feb/04/2011)

Everything is same as attempt 11.

Components

1. 9μl 2X pop + 1μl dna = 10 μl (1:10)
2. 9μl 4X pop + 1μl dna = 10 μl (1:10)

Procedure

Similar to 11.

results

I tried 10 times the dna concentration in hope of tethering. But no success.

Attempt .13(feb/07/2011)

I used Ant's old dna (07/15/09) of 1.1 and 4.4 kb.

Components

• 1μl .5 μm bead + 45μl BGB =50μl (1:100).
• .3 μl dna (1.1kb) + 29.7 μl POP(1X) = 30μl dna. 1.1kb dna (1:100).
• .3 μl dna (4.4 kb) + 29.7 μl POP(1X) = 30μl dna. 4.4kb dna (1:100).

Procedure

As of attempt 1.

Results

So far very exciting tethers every where and good tethers.