User:Pranav Rathi/Notebook/OT/2010/08/02/x & y Signal Drift Issue: Difference between revisions
From OpenWetWare
Jump to navigationJump to search
Pranav Rathi (talk | contribs) No edit summary |
Pranav Rathi (talk | contribs) (→Steps) |
||
Line 6: | Line 6: | ||
under work | under work | ||
====Steps==== | ====Steps==== | ||
# Measure the beam waist (2 x W=1.5) at the eyepiece lens of the telescope. | # Measure the beam waist (2 x W=1.5) at the eyepiece lens of the telescope. | ||
# Setup the (1:1) telescope: In this case two planoconvex lenses (f=38.1mm of both) are used. | # Setup the (1:1) telescope: In this case two planoconvex lenses (f=38.1mm of both) are used. |
Revision as of 14:23, 2 August 2010
Goal
Investigate the x & Y signal drift: What is causing it; AOM or the laser (most probable it’s the AOM), magnitude of the effect, and possible solution.
Setup & procedure
Procedure
under work
Steps
- Measure the beam waist (2 x W=1.5) at the eyepiece lens of the telescope.
- Setup the (1:1) telescope: In this case two planoconvex lenses (f=38.1mm of both) are used.
- Measure the beam waist again (2 x W =1.5) at QPD, to make sure that the ratio is 1:1.
- Straighten the beam after the telescope, using two aperture techniques [[1]].
- Setup the QPD on the xyz translation stage.