User:Pranav Rathi/Notebook/OT/2010/04/01
 Project name
|
<html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
High power beam profilingToday I discovered a new way to profile a beam at high power. I used a regular 1064nm mirror. The mirror gives a 99.99% reflection at 45 degrees. So I used the mirror in between CCD camera and the AOM at some angle less than 45. In this way transmission through the mirror can be controlled. its highest at 0 and lowest at 45. In between desired transmission can be achieved. I received a transmission of 99mW at 4.10W at the angle of roughly 15 degrees. I used the CCD with 3+3+2 OD filters. This setup does not distort the beam profile too much and it’s safe for the OD filters. We got some good pictures through this process; the link is presented below. http://openwetware.org/wiki/User:Anthony_Salvagno/Notebook/Research/2010/04/01/Laser_Issues_Resolved |
|
