User:Pranav Rathi/Notebook/OT/2010/04/01

From OpenWetWare

(Difference between revisions)
Jump to: navigation, search
(High power beam profiling)
(High power beam profiling)
Line 10: Line 10:
[[User:Steven J. Koch|Steve Koch]] 18:46, 1 April 2010 (EDT): Great idea!  Very cool that you can adjust the power like that.  And great that you discovered a good fix for the laser issue!  See Anthony's page for more suggestions.  Also, "gernal" is spelled wrong.  Did you mean "general" or "journal?"
[[User:Steven J. Koch|Steve Koch]] 18:46, 1 April 2010 (EDT): Great idea!  Very cool that you can adjust the power like that.  And great that you discovered a good fix for the laser issue!  See Anthony's page for more suggestions.  Also, "gernal" is spelled wrong.  Did you mean "general" or "journal?"
----
----
-
 
+
Go to the link for detail view:
-
http://openwetware.org/wiki/User:Anthony_Salvagno/Notebook/Research/2010/04/01/Laser_Issues_Resolved
+
[http://openwetware.org/wiki/User:Anthony_Salvagno/Notebook/Research/2010/04/01/Laser_Issues_Resolved]
----
----
[[Category:Optical Tweezer]]
[[Category:Optical Tweezer]]

Revision as of 18:08, 4 November 2010

Project name Main project page
Previous entry      Next entry

High power beam profiling

Today I discovered a new way to profile a beam at high power. I used a regular 1064nm mirror. The mirror gives a 99.99% reflection at 45 degrees. So I used the mirror in between CCD camera and the AOM at some angle less than 45. In this way transmission through the mirror can be controlled. its highest at 0 and lowest at 45. In between desired transmission can be achieved. I received a transmission of 99mW at 4.10W at the angle of roughly 15 degrees. I used the CCD with 3+3+2 OD filters. This setup does not distort the beam profile too much and it’s safe for the OD filters. We got some good pictures through this process; the link is presented below. Steve Koch 18:46, 1 April 2010 (EDT): Great idea! Very cool that you can adjust the power like that. And great that you discovered a good fix for the laser issue! See Anthony's page for more suggestions. Also, "gernal" is spelled wrong. Did you mean "general" or "journal?"


Go to the link for detail view: [1]


Personal tools