User:Pranav Rathi/Notebook/OT/2010/04/01

From OpenWetWare

< User:Pranav Rathi | Notebook | OT | 2010 | 04(Difference between revisions)
Jump to: navigation, search
(β†’High power beam profiling)
Current revision (16:10, 15 November 2012) (view source)
(β†’High power beam profiling)
 

Current revision

Project name Main project page
Previous entry      Next entry

High power beam profiling

Today I discovered a new way to profile a beam at high power. I used a regular 1064nm mirror. The mirror gives a 99.99% reflection at 45 degrees. So I used the mirror in between CCD camera and the AOM at some angle less than 45. In this way transmission through the mirror can be controlled. its highest at 0 and lowest at 45. In between desired transmission can be achieved. I received a transmission of 99mW at 4.10W at the angle of roughly 15 degrees. I used the CCD with 3+3+2 OD filters. This setup does not distort the beam profile too much and it’s safe for the OD filters. We got some good pictures through this process; the link is presented below.


Go to the link for detail view: [1]


Personal tools