User:Pranav Rathi/Notebook/OT/2010/03/03: Difference between revisions
Pranav Rathi (talk | contribs) (Autocreate 2010/03/03 Entry for User:Pranav_Rathi/Notebook/OT) |
Pranav Rathi (talk | contribs) |
||
Line 6: | Line 6: | ||
| colspan="2"| | | colspan="2"| | ||
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | <!-- ##### DO NOT edit above this line unless you know what you are doing. ##### --> | ||
Today 03/05/10 I did a quick experiment to measure that how much intensity we might have to cut down to snap the beam profile without saturating ccd. It turned out to be roughly 1e-7W, if input is 1W. Later I explored the possibility of using multiple reflections to cut down the intensity. It turned out that 1 plane glass strip cut down the intensity 10%. So 7 consecutively reflection will cut down the intensity up to roughly 1e-7. BUT each reflections contain 2 reflections out of two surfaces (I used 1mm thick), so total 14 REFLECTIONS. If use just an ultra thin may be a glass membrane carefully with one or two NDs than this can be done and beam profile might still be preserved. Still working…… | |||
I emailed Mr. Gunn on 03/04/10, about profiling the beam at higher powers, and waiting for his reply. | |||
[[Category: General Notes]] | |||
Revision as of 12:23, 11 March 2010
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Today 03/05/10 I did a quick experiment to measure that how much intensity we might have to cut down to snap the beam profile without saturating ccd. It turned out to be roughly 1e-7W, if input is 1W. Later I explored the possibility of using multiple reflections to cut down the intensity. It turned out that 1 plane glass strip cut down the intensity 10%. So 7 consecutively reflection will cut down the intensity up to roughly 1e-7. BUT each reflections contain 2 reflections out of two surfaces (I used 1mm thick), so total 14 REFLECTIONS. If use just an ultra thin may be a glass membrane carefully with one or two NDs than this can be done and beam profile might still be preserved. Still working…… I emailed Mr. Gunn on 03/04/10, about profiling the beam at higher powers, and waiting for his reply. |