|Line 24:||Line 24:|
Revision as of 13:20, 14 September 2010
|Project name|| Main project page|
Fluorescence Microscopy (Basic Concepts)
Fluorescence is an optical phenomenon that occurs when light is absorbed by a material or substance. As a result of this, light is emitted at a different wavelength. Usually, the emitted wavelength is longer than the incident one, unless the incident electromagnetic radiation is intense and one electron absorbs two photons causing a shorter wavelength emission. More specifically, when electrons absorb light, they get excited to higher energy states. Right after, the electrons fall back to the lowest excited energy state in a process known as internal conversion. They remain there for a considerable amount of time, in the order of 10 ns, and as they go back to the ground state they emit the photon.
Summary of how a fluorescence microscope works
First, the sample needs to be dyed with fluorophores and be placed in the stage. Then, the light source sends the excitation light towards the excitation filter, which only lets through the excitation light. This is reflected by the dichroic mirror in a direction such that the reflected light passes through the objective to the sample. Then, the emitted fluorescence passes through the same objective in the same direction as the emitted light. Therefore, it once again reaches the dichroic mirror, which enables only the emitted light to go through. After this, the light hits the emission filter or blocking filter which blocks the excitation light and only lets the emission light through. Finally, the emitted light reaches the eyepiece or detection system and can be observed by the naked eye. The excitation and emission filters, along with the dichroic mirror, are placed in what is known as the filter cube.
Description of the main parts of a fluorescence microscope
Epifluorescence microscopy, unlike regular fluorescence microscopy, allows the light source to direct light onto the specimen by first passing the excitation light through the microscope objective on its way towards the sample. Then, it is the same objective that collects the emitted fluorescence. In this case, the objective works as a condenser.