User:Michael F. Nagle/Notebook/Tattnauer Brinkman 3545M/2012/12/07

From OpenWetWare

< User:Michael F. Nagle | Notebook | Tattnauer Brinkman 3545M | 2012 | 12
Revision as of 04:34, 8 December 2012 by Michael F. Nagle (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Tattnauer Brinkman 3545M Autoclave Main project page

Description

Image:Au_to_clave.png

  • Tattnauer Brinkman 3545M
  • Tabletop autoclave

Purpose of Use

  • Completely sterilize material with high temperature and pressure

Use

  • Twist dial on bottom right corner to "Fill" and wait for water to fill up to the metal ridge near the door.
  • Insert the material that needs to be autoclaved.
  • Close the door and twist the door handle shut.
  • Set temperature and time
  • Turn knob to "sterilize"
  • Wait 30 minutes after sterilization is complete for pressure to reach 0psi, before openning autoclave.

Safety

  • After autoclaving, wait until pressure dial is at 0psi before opening the autoclave. This takes about 30 minutes.

Specifications

  • 12.2" wide, 18.5" deep
  • 3.25L refillable water reservoir
  • corrosion resistant chamber
  • exhaust options


Location

  • Beeghly 314

Contact



Retrieved from "http://openwetware.org/wiki/User:Michael_F._Nagle/Notebook/Tattnauer_Brinkman_3545M/2012/12/07"
Personal tools