User:Michael F. Nagle/Notebook/Chem 571/2012/11/29: Difference between revisions

From OpenWetWare
Jump to navigationJump to search
(Autocreate 2012/11/29 Entry for User:Michael_F._Nagle/Notebook/Chem_571)
 
No edit summary
Line 6: Line 6:
| colspan="2"|
| colspan="2"|
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit above this line unless you know what you are doing. ##### -->
==Entry title==
==UV/Vis analysis of Au/ADA solutions==
* Insert content here...
*Solutions prepared yesterday of 6.7-40 [Au/ADA] were analyzed
 
[[Image:Lastadafull.jpg]]
 
[[Image:Lastatlast.jpg]]
==Discussion==
*Neither purple solution nor fibers were visible in the 33.3 and 36.7 [Au/ADA] solutions, although 26.7 and 33.3 were purple and 40 had fibers. The fact that these defy the trend indicate likely experimental error. Gold may have been stuck to the end of the tube, which can happen if the tubes are not shaken after everything is added. This would result in gold not making it into the solution, which would explain this.
*We see an increase from 23.3 to 30, and fibers with no 528nm peak at 40, indicating that the optimal mole ratio range is between 30-40 [Au/ADA]. This range needs to be looked at further with more trials.
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
<!-- ##### DO NOT edit below this line unless you know what you are doing. ##### -->
|}
|}


__NOTOC__
__NOTOC__

Revision as of 07:01, 7 December 2012

Project name <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page
<html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html>

UV/Vis analysis of Au/ADA solutions

  • Solutions prepared yesterday of 6.7-40 [Au/ADA] were analyzed

Discussion

  • Neither purple solution nor fibers were visible in the 33.3 and 36.7 [Au/ADA] solutions, although 26.7 and 33.3 were purple and 40 had fibers. The fact that these defy the trend indicate likely experimental error. Gold may have been stuck to the end of the tube, which can happen if the tubes are not shaken after everything is added. This would result in gold not making it into the solution, which would explain this.
  • We see an increase from 23.3 to 30, and fibers with no 528nm peak at 40, indicating that the optimal mole ratio range is between 30-40 [Au/ADA]. This range needs to be looked at further with more trials.