User:Matthew R Skorski/Notebook/Cellulose Summer 2014/2014/09/17
Project name | <html><img src="/images/9/94/Report.png" border="0" /></html> Main project page <html><img src="/images/c/c3/Resultset_previous.png" border="0" /></html>Previous entry<html> </html>Next entry<html><img src="/images/5/5c/Resultset_next.png" border="0" /></html> |
Entry titlePurpose: Create 25 g cast of TiO2 5% and mix 1% filament in Dr. Fox's extruder Safety and Procedure: Normal large casting, see 6/18/14, but with 250 mL of acetone instead of 200. ________ for Dr. Fox's extruder instructions. Experimental: Created a 25 g TiO2 cast Mass % Mass TiO2 Mass ABS 5.0% 1.2499 g 23.7498 g Added 250 mL acetone to TiO2. Sonicated from 9:10 am to 9:16 am at 20°C to 23°C. Added ABS and sonicated from 9:16 am at 23°C to 5:10 pm at 34°C. The solution was smooth when poured into the pan, no flecks of ABS were noticed. Heated the pan at 80°C from 5:10 pm to 7:10 pm. Cut up all the castings from 9/10 and 9/12 into little pieces. Massed total and measured 54.6012 g. Should be about 50 g as 25 + 25 is 50 but apparently something besides TiO2 and ABS was in the castings. It is hypothesized this is acetone leftover from the casting. Mass of samples to examine molecular weight Post Cast (PC) 0.04679 g
|