As stated in the protocol, the absorbance of the following malachite green solutions; 0ppm, 0.20ppm, 0.50ppm, 1.1ppm, 1.4ppm, 1.7ppm, and 2.0ppm Malachite Green, were taken.
The sample cell used was a quartz cuvette. The absorbance of each concentration was recorded from 200 to 800 nm.
Observing the absorbance of the malachite green solutions from the figure below, the two prominent maxima are at 423 and 617 nm.
Absorbance of Malachite Green Solutions
Dilution calculations for taking the absorbance of malachite green samples, 80 ppm MG in PVA and 200 ppm MG in PVA with clay, were performed by James Schwabacher and Jacob Esenther. Matt Hartings Even though you give attribution to who made these samples, you NEED to say how they were made.
Using the same quartz cuvette, absorbance of malachite green samples with the concentration of 2, 8, 80, and 200 ppm, were taken from 200 to 800 nm.
Absorbance of Malachite Green in Sample Films
Batch 3 Film Synthesis
1.0256 g of PVA and 1.0272 g of PVA (make of Southern Clay Products) + 0.1176 g of sodium montmorillonite (make of MP Biomedicals) were dissolved in 7 mL of distilled water.
Casting of films were followed as stated in the original protocol.
Notes
Be wary of the wavelengths being recorded and saved on the data print table.
Project name
